User's Manual

ManualsBrandsKaiterra ManualsHeating & VentilationSensedge Mini Air Quality Monitor

Kaiterra Sensedge Mini

Air Quality Monitor

Made in China

www.kaiterra.com support@kaiterra.com

Origins Technology Limited.

18 Xinzhong St Dushiyangguang4-1106, Dongcheng, Beijing, China

Summary of content (13 pages)

PAGE 1
Kaiterra Sensedge Mini Air Quality Monitor Made in China www.kaiterra.com support@kaiterra.com Origins Technology Limited.
PAGE 2
ENGLISH Kaiterra Sensedge Mini Air Quality Monitor User Manual What’s Included              Sensedge Mini Sensedge Mini sensor modules x 2 Surface / Drywall mount Electrical box mount Drywall screws and anchors (3 pairs) Electrical box screws (US) x 2 Electrical box screws (China and EU) x 2 Fastening screws x 2 USB cable Charger Certificate of calibration and testing User manual Certificate of conformity Important Safeguards Please read the safety warnings before use and take the necessary p
PAGE 3
The Sensedge Mini is a commercial-grade air quality monitor. This user manual will provide a basic guide to its first use. Further information can be found on the Kaiterra Support Portal at http://support.kaiterra.com/sensedge-mini Operational Temperature：0 - 50℃ Externals and Air Flow Air is drawn into the Sensedge Mini from the lower side, as well as the air intake on the upper side. It is vital that neither side of the device is covered. Any changes in airflow may affect the readings and accuracy.
PAGE 4
 RS-485: Used for Modbus communication Sensor Modules The Sensedge Mini utilizes a modular design to allow for easy control and replacement of sensors. A CO2 sensor and a temperature and relative humidity sensor areis built into the core of the device, and a variety of other sensors may be inserted using the two sensor bays on the lower side of the device. To insert a sensor module, simply align it with the bay and press it in, ensuring the Kaiterra logo on the plastic tab is facing outwards.
PAGE 5
To reset the device, use a paperclip and hold down the RESET pinhole. The STATUS light will flash red rapidly, indicating that the reset is successful.
PAGE 6
Kaiterra provides a 1-year limited manufacturer warranty on the Sensedge Mini. To obtain a copy of the warranty for this product, please visit https://support.kaiterra.com/policies Troubleshooting For additional support, please contact your sales representative or email us at support@kaiterra.
PAGE 7
中文 Kaiterra 睿石 Mini 空气质量监测仪用户手册包装清单  睿石 Mini 主机  睿石 Mini 传感器模块 x 2  墙面/石膏板墙安装圆盘底座  有底盒安装方盘底座  石膏板螺丝&锚栓（3 对）  底盒螺丝（美标）x 2  底盒螺丝（国标/欧标）x 2  固定螺丝 x 2  USB 数据线  充电器  校准测试报告  用户手册  合格证书重要预防措施请在使用前阅读安全须知，并采取必要预防措施来降低火灾、电击或受伤的风险。原点生活（Kaiterra）有限保修仅在遵照这些说明使用设备时适用。安全须知  为了避免危险，必须始终由制造商、服务代理商或有资质的人员进行安装、维护等操作。  安装与维护前，请确保电源已断开。  请勿以任何方式改造或使用非官方配件维修维护设备。  请勿将设备置于高湿度环境或可能直接接触水的位置。  请勿将设备置于室外。  请勿将设备放在散热器、壁炉、烤箱、炉灶等热源附近。开始使用
PAGE 8
睿石 Mini 是一款商用空气质量监测仪。此手册为用户首次使用设备提供指导，更多信息可以在 Kaiterra 官网的“客户支持”中查询，链接地址： http://support.kaiterra.com/sensedge-mini。运行温度：0 - 50℃ 外观和空气流动睿石 Mini 的进气口位于设备的上方和下方，使用时请确保设备的任何一侧都不能被覆盖。气流的变化可能影响睿石 Mini 的读数及准确性。供电和联网方式睿石 Mini 提供多种供电和联网选择：供电：  USB-C：仅可使用设备随附的数据线及充电器或适配器  DC 电源接口：用于 12V，1000mA 供电  PoE（通过以太网供电）：适用于型号 SE000200P 联网：  2.4GHz Wi-Fi （802.
PAGE 9
 RS-485：用于支持 Modbus 通讯传感器模块睿石 Mini 采用模块化设计，便于控制及更换传感器。其中，二氧化碳和温湿度传感器内置于设备内部，设备下方的两个传感器凹槽可用于装载各种其他的传感器模块。安装传感器模块时，只需将传感器轻压入凹槽内，确保铝制外壳上的 Kaiterra 标志朝外即可。当正确安装后，模块将被锁定于凹槽内，如设备已经接入电源，模块凹糟上方的模块状态指示灯会短暂亮起且呈红色。如需拆卸模块，轻轻提起拉环，使拉环与模块呈 90 度角，然后向外拉动，即可从凹槽内拆下模块。传感器模块可以安装到任何一个传感器凹槽中，并且任意顺序安装均可。传感器模块在睿石 Mini 开机运行时以及关闭时均可进行更换。默认情况下，睿石 Mini 随机附带 KM-200 和 KM-203 传感器模块，检测 PM2.
PAGE 10
如需重置设备，请使用回形针长按重置孔，直到状态指示灯开始快速闪烁红色，即表示设备重置成功。状态指示灯含义：通用：指示灯不亮设备正常工作红灯短暂亮起设备成功开机红灯快速闪烁设备重置成功配置：黄灯闪烁设备处于配置模式黄灯持续快闪 5 秒钟通过配置工具识别设备绿灯快速闪烁正在接入网络或通讯绿灯明暗变换闪烁正在接入云端故障排除：红灯长亮设备故障红灯闪烁没有网络连接安装睿石 Mini 睿石 Mini 支持墙面表面安装、石膏板墙安装、吊顶安装以及有底盒安装等方式。关于产品安装说明、供电以及联网设置等更多信息，请访问 Kaiterra 官网“客户支持”： http://support.kaiterra.
PAGE 11
质保政策 Kaiterra 为睿石 Mini 提供一年的有限保修服务，如需完整质保政策文档，请访问 https://support.kaiterra.com/policies。故障排除如需其他支持，请联系您的销售代表或发送邮件至 support@kaiterra.
PAGE 12
END - FCC Caution Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 13
The product shall be connected to a USB interface of version USB2.0 or higher. Hereby, Origins Technology Limited declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states. RADIO FREQUENCY MAXIMUM TRANSMIT POWER AND FREQUENCY BAND INFORMATION Frequency bands Maximum output power WIFI(EIRP) 2412-2472MHz 15.