TCM health Management Terminal W22ACB User’s Manual
Thank you for choosing this product. This manual provides information about the operation instructions. Please read it carefully and save it for future use. The information in this manual is subject to change without notice. © 2021 V2 . Suzhou kaishika Intelligent Technology Co., Ltd. All rights reserved. Reproduction in any form is strictly prohibited without the written permission of the company.
1、 Preface Kaiska is a kind of public service and multimedia information terminal equipment which can be self-help by touching the information content to be entered into or displayed automatically by the network by the background big data system by the network. It realizes self-service and multimedia information terminal equipment by scanning, swiping, printing and other functional components.
6. Information display supports multi network type, multi-type format, centralized network control and unified management. It transmits all kinds of data information to the integrated terminal through network platform, and displays it with high-quality display effect. It can realize the whole system networking and manage all the terminal integrated machine products of the whole system.
Interactive interface 3.1.1 identification of identity or input card number 3.2.1 informed consent 3.2.2 questionnaire check 3.3.
system architecture The self-service terminal integrated machine supports two states, offline and online, and realizes communication with AI background on the basis of ensuring the availability of the machine 24 hours. Meanwhile, the management side supports the query and download of statistical data, which is convenient for relevant managers to objectively evaluate the overall situation of the patients involved in the project, and facilitate the further management of the data by the management personnel.
Manage background big data statistics Network architecture remarks:
1. Some models of the terminal integrated machine products are equipped with external power switch at the back of the cabinet, which can be connected with the host switch according to the user's needs, and realize the function of controlling the computer host switch outside the cabinet. 2. The integrated machine products shall not be disassembled or modified by themselves.
4、 Equipment placement Installation diagram [vertical]
1. The vertical integral machine must be placed vertically on a solid ground. 2. The distance between both sides and rear of vertical integrated machine shall not be less than 5cm from the wall. （A） 3. The position of the operator and the integrated machine operation plane is about 20cm. （B） 4. Vertical integrated machine is strictly prohibited to be placed outside (except for special outdoor models).
5、 Unpacking operation of integrated machine equipment 1. after unpacking the wooden box, the box cabinet shall be inside Pull out and cut off the white packing belt from one side Exit the touch screen cabinet and check the machine surface for damage. 2. remove the key behind the cabinet, open the rear door of the cabinet, take out the power cord in the packing bag and insert the machine input socket.
right figure) 3. turn on the power and turn on the red main power switch to I. the switch indicator will be powered on automatically, indicating that the machine has been powered on and turned on (the screen will be displayed waiting for 20 seconds). (see red switch button in the middle right) 4.
Integrated machine front view integrated machine rear view Main component name of integrated machine 1. Camera (reserved for selection) 2. LED LCD / touch screen 3. RFID, second generation card reader 4 thermal printer 5. Printer open button (back) 6. Main cabinet 7. Cabinet horn 8.
(1) Internal master control system: (optional) CPU Intel g2030 ~ i5 dual core series processor /intel J1900 2.0g quad core processor Memory ddrii/vi 4-8g 1333 Mainboard commercial series motherboard / industrial series motherboard Hard disk st/wd 1TB sata/60-128g solid state hard disk Graphics board integration AC97 integrated sound card motherboard Network card 10-100mb LAN Dvd-rom/combo (optional) (2) Touch screen: (subject to the configuration table of integrated machine) Dimensions: lcd/led class: 10.
Resolution: 1024 * 768 - 1920 * 1080 － 3480 * 2160 (4) Applicable operating system: Windows xp/windows 7/10/android series (5) Android series: (Android host) CPU rk series or above dual core processor Memory 1G-4G Storage 8g-32g up / or SD card expansion High performance audio video hardware decoding of video and audio card 8、 Guide to use 1、 Daily use 1.
The object of the product is information questionnaire screening, big data statistics, etc. When the user needs to operate, you can get the information you need by simply finding and touching the corresponding items in the system page. 3. close If the host is turned on and uses the automatic switch function, the above steps (shutdown) are not required. The host will run by itself according to the set on and off time.
normally. 1. Capacitive touch screen [example] What should be paid attention to for the capacitance touch screen? 1. The capacitance touch screen is glass products. Falling and hitting will cause damage. Therefore, it should be taken lightly To release; to release; 2. If the capacitance touch screen is not working properly, especially when abnormal odor is emitted from the inside Unplug the plug immediately and contact us or the seller; 3. Do not plug plug frequently with power 4.
double-click; 2. Calibration is conducted in the way of common people's touch habits, rather than the calibration mark with fingers perpendicular to the calibration mark; 3. In the control panel, double-click the mouse pointer slowly. If it is too fast, the computer will think twice as double clicking, which will usually solve the problem that double clicking cannot open the double-click object. If the capacitance touch screen does not respond, how to solve it? 1.
How much is the touch accuracy of capacitance touch screen? The touch accuracy of capacitance touch screen has reached 4096 × 4096. Does capacitance need to be calibrated frequently in use of touch screen? The capacitor touch screen works very stably, and its good component production will not drift due to the change of time and environment.
can achieve the following indicators: Pressure stress on glass surface: 30kgf/ M2 Bending strength of glass: 100kgf/ M2 Impact strength: a smooth steel ball with a diameter of 63.5mm (mass of 1040g), 1000mm from the surface of the glass of the sample, so that it can fall freely without breaking the sample.
In what circumstances does the capacitance touch screen need to be calibrated? How to calibrate? If you have installed the capacitance touch screen for the first time or if the resolution of your computer has changed, you must recalibrate the touch screen. The calibration method is as follows: click the "pen and touch screen" option in the control panel, and click the "calibration" button. When the calibration interface is displayed, click the icon on the interface in turn.
radiation. The radiation of the capacitance touch screen is within the standard range, and its design parts pass the international standard detection, which will not harm the human body. Does finger printing and dust affect the touch screen? Will scratch the screen have any influence? The capacitance touch screen is operated by the electromagnetic capacitance induction receiver of human finger, which has nothing to do with the glass plate itself.
way, and it is strictly forbidden to put upside down, lay flat or bump. 2. The packing box and filler must be used for the transportation or moving of the terminal integrated machine. It is strictly forbidden to transport or move bare metal. 11、 Service commitment The terminal integrated machine products are provided with manufacturer warranty service. See the contract for the warranty time. For detailed warranty terms, see the product warranty rules.
Warranty and maintenance terms and conditions 1、 Detailed rules for replacement ● the company shall provide free replacement service for the repair of products meeting the following conditions within 3 months: 1. Inspection period: within 5 days after receiving the equipment, the user shall detect the appearance and hardware damage of equipment and articles according to the company's testing standards within this time.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
