Manual

USAGE

DIGITAL CLOCK TIMER

WITH FULL SENSOR CONTROL

LOGIC CONTROL

Setting the clock

After your microwave oven is first plugged in or after a

power failure, the clock will flash to indicate that the time

is not correct.

• Touch the key .

digits start to flash to

• Touch the keys to set the hours.

• Touch again the key to set the minutes.

The minute digits will start to flash.

• Touch the keys to set the minutes.

• To finish, touch the key again.

To reset the time:

• Touch the key for 1 second.

• Repeat the forenamed actions.

If any function has been chosen, but not started by

touching the button , this function is

cancelled in 60 seconds.

The digital time switch clock passes in the ,

thus burn keys of working functions the clock setting

key , current time on the the display , keys ,

and , .

If the device is in the Initial mode more than 60 seconds

it passes in the .

To set the current time:

The show that you are in clock

setting mode.

Initial mode

energy-saving mode

START

STOP