Datasheet

22
For Everything that
Won’t Fit Your Scanner!
J
ust in case, something would not fit on your scanner – too big, too
bulky, too wide etc. – here is where it belongs. Combined these
stands with your camera and enjoy a perfect image capturing tool for
all “awkward” items that need to be photographed from above: the
vintage LP cover, grandfather’s precious pocket watch or
just a section out of a large-sized road map.
Suitable lights can easily be added.
Super-compact camera stand for small, lightweight cameras. Non-reflecti-
ve, matt-black baseboard. Column with cm/inch scale. Height-adjustable
camera arm. 1/4” mounting thread. Baseboard (WxHxD): 32 x 1.9 x 38 cm
(12.6 x 0.7 x 15 in.). Column height: 59 cm (23.2 in.). Max. load: 1 kg
(2.2 lbs.). Includes lighting unit with two E 27 screw-in mounts for lamps
up to 250 Watt (supplied without lamps). Code no. 5360
5411 with 5453
„reprokid“ Camera Stand
Suitable for digital
cameras with filter
thread. Connecting
thread 52 mm. With
detachable achroma-
tic macro lens. Full
size copy can be
obtained using it
with a lens with
focal length of 80 – 120 mm, details with higher focal
length. Includes holder for two slides and 58-52 mm
adapter ring.
Digital Slide
Duplicator
6506
Film Strip Carrier
For six 35mm nega-
tives or unmounted
slides. For use with
Slide Duplicator
6506.
6507
Non-reflective matt grey baseboard with printed fine grid and
cm/inch scale. Matt-black anodised aluminium section tube
column with cm/inch scale. Hand-cranked height adjustment.
Horizontally adjustable camera arm. 1/4” mounting thread.
Baseboard (WxHxD): approx. 40 x 2.5 x 50 cm (15.7 x 1 x 19.7
in.). Column height: approx. 76 cm (30 in.). Maximum load: 1.5
kg (3.3 lbs.). Code no. 5411
With two small light banks with interior reflector and 18 W,
5400 K daylight fluorescent lamp. Lights are tiltable and adjusta-
ble in height. Angle of vertical arms adjustable by lock joint.
Mounted with strong die-cast clamp bases. Separate control box.
Code no. 5453
With four tiltable and adjusta-
ble reflectors on mounting
arms which are in turn tiltable
and adjustable in height. Lights
can be switched on separately.
Suitable lamps: 4 x 150 W max.
Supplied without lamps.
5450
RS 2 XA Camera Stand
RB 218 Lighting Unit
RB 2 Lighting Unit
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 14:37 Seite 22