SDS

V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE
Product name
5
Product code
Date of issue
Version
00405412
1 May 2016
Section 2. Hazards identification
Prevention
:
Obtain special instructions before use. Do not handle until all safety precautions have
been read and understood. Wear protective gloves. Wear eye or face protection.
Wear protective clothing.
Response
:
IF exposed or concerned: Get medical attention.
Storage
:
Store locked up.
Disposal
:
Dispose of contents and container in accordance with all local, regional, national and
international regulations.
Supplemental label
elements
:
Sanding and grinding dusts may be harmful if inhaled. This product contains crystalline
silica which can cause lung cancer or silicosis. The risk of cancer depends on the
duration and level of exposure to dust from sanding surfaces or mist from spray
applications. Repeated exposure to high vapor concentrations may cause irritation of
the respiratory system and permanent brain and nervous system damage. Inhalation of
vapor/aerosol concentrations above the recommended exposure limits causes
headaches, drowsiness and nausea and may lead to unconsciousness or death.
1-component mixtures:
formaldehyde is released during curing. Formaldehyde may
cause irreversible effects, is irritating to the mucous membranes and may cause skin
sensitization. Emits toxic fumes when heated. DANGER - RAGS, STEEL WOOL OR
WASTE SOAKED WITH THIS PRODUCT MAY SPONTANEOUSLY CATCH FIRE IF
IMPROPERLY DISCARDED. IMMEDIATELY AFTER EACH USE, PLACE RAGS,
STEEL WOOL OR WASTE IN A SEALED WATER-FILLED METAL CONTAINER.
Hazards not otherwise
classified
:
None known.
Section 3. Composition/information on ingredients
titanium dioxide
≥10 - ≤20
13463-67-7
2-butoxyethanol
≥5.0 - <10
111-76-2
Talc , not containing asbestiform fibres
≥5.0 - ≤10
14807-96-6
crystalline silica, respirable powder (<10 microns)
<1.0
14808-60-7
Ingredient name
CAS number
%
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Substance/mixture
:
Occupational exposure limits, if available, are listed in Section 8.
Mixture
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Product name
V50-410 BREAK-THROUGH! INT/EXT SATIN-WHITE/PASTEL BASE
:
SUB codes represent substances without registered CAS Numbers.
United States
Page: 2/13