Lol When powered on, the chair will automatically begin ina preparation . position. When powered off, the chair will go back 1o its original position. 2. In ON status, press it to enter quick relaxation auto program, there is relative status screen display. Default massage time is 8 minutes. Press it again to stop. 3, Press this button to stop all the on-going massage immediately. All buttons will not quark, I user wants to continue massage, please press the Nonfood button to turn on the controller. . 4.
LCD display graphic description [ Main interface Press “on/off" button whew char power & on, a blazer beeps Once Short it LCD screen display boot screen, after 2-3 seconds it displays the main interface dnd enter standby mode. Main Interface show massage position, method, them, heating current massage status etc,, all information will be updated timely wham the chair start working. #2 .
LCD display sown Trisect by the navigation keys graphic description | Ay ¥ There are o kinds of air pressure related transposition and Intensity Choose the corresponding function, then press "ok” to enter neat menu and choose required function.
OPERATION INSTRUCTION AND UNCTION ILLUSTRATION | ON/OFF | Poe sixtieth) Sept. Power on @ Put one end plug of power ding into “a” hole. & Please make sure the controller cord to be inserted into hale b @ Put power plug To socket, @ Turn on the power switch which is on the power box, massage chair 1§ powered, @ Press “ripoff” on the controller, *DiY beep sound send ouf, mean while enter into the main display interface. Ste pd.
OPERATION INSTRUCTION AND FUNCTION ILLUSTRATION | Function illustration | Leg rest up Press this bunion on controller, leg rest ages up. Release the button, Regress stops macing, the angle is docked in this position, . A Leg rest down Pres this button on contralto, Leg rest goes down. Release the bunion, leg rest stops mating, the angle docked in this position. . '.I' Legree up ang backrest down \ Press this butting on contralto, backrest go down and gristle go up, Release s button, backrest and leg rest st
AFTER MASSAGE | Restoration of massage chair | 4 Make sure there is no people o peter @ Switch off the power. anything within the range of backrest and leg rest. B Make backrest and leg rest restore 1o the normal position by controller (or press on/oft key 1o male backrest and leg rest restore o the normal position) Clean the chair if necessary. @ Put the remote control back to the pocket after chair gets reset.
CLEAN AND MAINTENANCE | synthetic leather | | Plastic parts | General cleaning @ Dip cloth into neutral detergent, Cloak with tidy, soft and dry cloth sightly. squeeze it and Clean (Chemical ar medical cleaning @ but dust aré forbids Stuart 3 Microchips & forbidden) & Le tit dry fully before using Clean the controller | If feather Is dirty & Dip soft sloth into 3-5% neutral detergent Wipe with soft cloth after squeezing. solution, squire it then clean the stain on the surface gently, @Allan 1o dry.
TECHNICAL DATA Name TIL-track Massage chair | Power 200 Main body 19842 b/ 24692 b Meade! SM 7300 NW/GW Armrest39.66 b /6173 b Input vantage | ACACIA, 60Hz Main body packing size 5118x29.38x49 41 inch Armrest Safety design | Class 1 44.49% 16.54% 33.
Product Massage Chair Modal SM 7300 Developed by AJX Distribution LLC 25 Knotting Ave, Suite £ Cypress, €A 90630 Tel +855-646-9500 Email INFOBKAHUNACHAIR.COM You rust register warranty at way kahunachaircom/services/ INSTRUCTION MANUAL Please read this user manual thoroughly prior to MODELS 7300 operating the massage chair. Si ore this booklet for future reference.