| Step 1. Unpack the box | Box 1: Carry oyt the main body, leg part and accessory Hi ox.
| Step 3. Connect the leg part | @ Connect the power cord and air hose To the main body. B Hang the leg part as Shawn im the picture to the leg part adapter of the main bad, fx it with pins and bolt w 8 1 wwwiahunachar.
| Step 3. Install the base cover | @ Insert the bottom af the base cover (e the connector on the base frame of the main bad from top to bottom @ Disc it with screws, 181 enwwiahunachar.
| Step 4. Install armrest | @ Lift the front of the side panel while positioning the cone shaped latch towards the slot on the main body. @ Pauli the string on the slot to release the lock and push the side panel in, connecting the cone-shaped latch into the slot while applying pressure, @ Set the armrest closely 1o the main body (as picture 2). Insert the parts card into intermediate shaft of the main body from the top to the bottom slowly.
& Connect the air hose and power cord 10 the main body. @ Finally, insert the fixed block {as shown in picture 3) info the fixed axis of the main body from the top to the bottom. [0] The correct method The fault er hod 121 ewwiahunacha.
| Step 5. stall the back cushion and remote | @ Lay the back cushion flat on the main body (as shown in the photo above, then close the zipper at the top. & Connect the remote cord 1o the cord on the main body.
Description Specifications Product Marie Uriah Massage Chair HM Series Model Mo HM-078 HUBBUB Rated Voltage T0-120V~ Rated Frequency 53/60Hz Rated Power Consumption | 220 W Max. Dimension {LxWikH) Inches 49.
