Instructions / Assembly

1-Attach Corner Sleeve (J1) to assembled Beam(B/B1/C/C1),
fasten by using Bolt (X4).
2-Attach Rib Supports (J2) to middle of assembled Beam(B/B1 /C/
C1), fasten by using Bolt (X4).
1-Slide 5 Hooks(Q) into long sides beams(B/B1).
2-Slide 4 Hooks(Q) into short sides beams(C/C1).
3-Attach part M6 to inside beams(B/B1/C/C1)fix by using Bolt(X4)
Note: There are two tracks. You can choose either track to install
Part Q