Instructions / Assembly

retention point
Figure 5
Figure 4
B
3.
Place the gas cylinder into the cylinder holder. Secure the cylinder by tightening clockwise the retention point
found on the cylinder holder, so that the cylinder cannot move from side to side or fall down. Connect the
regulator, screw the black handle clockwise to tighten, turn the black handle counterclockwise to remove. The
hose must point down. The knob on the control panel is turned all the way to the “OFF” position when the fire
pit is NOT in use (See Figure 3).
A
5. Cover the fire pit with the outdoor weather cover (C) when not in use to protect it from the elements or when
fire pit is cool COMPLETELY after the use (See Figure 5).
4. Attach the door (B) with fire table (A) tenderly (See Figure 4).
C
Figure 3
05