Specification Sheet

Unican Lock Division
Application
The 8100 Series lock, with the added security
of a mortise lock and deadbolt, provides fully
mechanical pushbutton access control with
no electrical wiring, electronics, or batteries.
Exterior access is by combination. Egress is
by interior lever and is free at all times.
The lock meets Americans with Disabilities
Act (ADA) standards.
8100 Series locksets are ideal for limiting access
to high-traffic, security-sensitive areas in
commercial, institutional, residential, and industrial
buildings. These locks are perfect for locations
with a high personnel turnover rate such as
data processing centers, employee entrances,
R&D labs, apartments, dormitories, and restricted
areas in hospitals and airports.
The pushbutton design eliminates problems
associated with the issue, control, and collection
of keys and magnetic cards. The combination
can be quickly and easily changed to ensure
continued maximum security once employees,
tenants, or guests leave, saving the cost
of new keys, key cylinders, magnetic cards,
and card-encoding devices.
Features
One-hand operation: Depress the buttons in the
correct sequence to unlock the anti-friction latch.
Thousands of possible combinations:
Authorized individuals can change the combination
in seconds. One or all five buttons can be used
in the combination with two or more buttons
depressed simultaneously.
Easy to install on wood or metal doors:
The lock requires standard (86) mortise preparation.
Rugged & weather resistant:
The lock is wear-tested for intensive use.
Includes: Standard strikes, installation
instructions; full-scale template,
combination change wrench.
Standard Features
Key override: Can be used to override the
lock combination and deadbolt to gain access
using a key. This feature allows facilities to initiate
or maintain a master-keyed security system
(keyed alike or keyed differently). The lock
accepts removable core cylinders (not supplied
except with “XB” models.)
Passage: Allows access without using the lock
entry code, keeping the door unlocked even while
closed. This feature is activated from the inside
with a thumbturn or key.
Lockout (privacy): Disables the lock from
the inside so that entry codes cannot be used
to gain access. Access is permitted using the
key override only. This feature is activated
from the inside with a key.
Specifications
Construction: Heavy-duty mortise lock
housing; conforms to ANSI 156.3; cast front
housing; brass unified trim plate; fixed cast
or wrought ADA-compliant levers
Strike: 4
7
/
8
” (124 mm) L x 1
1
/
4
” (32 mm)
W x
1
/
4
” (6 mm) D mortise strike plate
Latch & backset: 1” (25 mm) deadbolt;
3
/
4
” (19 mm) two-piece anti-friction latch
(meets or exceeds UL/ULC 3-hour fire rating
for “A” labeled doors); accommodates
1
/
2
” (13 mm) throw; 2
3
/
4
” (70 mm) backset
Door thickness: 1
1
/
2
” (38 mm) to 2
1
/
4
” (57 mm)
Installation: Standard (86) mortise preparation;
5” (127 mm) minimum stile required
Door handing: Factory-handed;
not field reversible
Control: DF5 keys or thumbturn
for passage and lockout
Finishes: 03 (605) “Chiara” Bright Brass;
05 (609) Antique Brass; 26D (626) Satin Chrome
Weight: 9.8 lbs. (3.7 kg)
8100 Series
1
1
/
4
"
(32 mm)
8"
(203 mm)
7
3
/
8
"
(187 mm)
3
1
/
8
"
(79 mm)
9"
(229 mm)
3
1
/
4
"
(83 mm)
Dimensions
C
PL
2
3
/
8
"
(60 mm)
3
13
/
16
"
(97 mm)
LP
C
Exterior Interior
1
2
3
4
5
7