Installation Sheet

2 3
TABLE OF CONTENTS
Simplex 5000
Assembly Drawing (Simplex 5000 Exit Trim) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
A. Door Preparation – Exit Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
B. Door Preparation – Simplex 5000 Exit Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
C. Install Exit Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
D. Door Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
E. Assemble Outside Unit to Universal Mounting Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
F. Lock Handing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
G. Changing Key-in-Lever (KIL) Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
H. Installing / Removing Outside Lever (Key-in-Lever Models) . . . . . . . . . . . . . . . . . . . . . .8
I. Installing / Removing Outside Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
(Interchangeable / Removable Core Models)
J. Installing Simplex 5000 Exit Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
K. Testing Operation of the Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
L. Changing Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
M. Reset a Lost or Unknown Combination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
N. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
The Simplex 5000 Exit Trim lock is
adaptable to a wide variety of exit
devices on the market today. No tools are
required to reverse handing, and the
spring loaded tailpiece drive automatical-
ly adjusts to door thickness from 1
3
⁄4" to
2
1
⁄8". Door thickness of up to 2
1
⁄4" inch-
es can be accommodated through the
addition of a spacer ring. The Simplex
5000 Exit Trim lock accommodates
through bolt mounting as used in most
fire rated installations as well as surface
mounted applications and is retrofitable
to existing installations. Before beginning
installation, please read and understand
all of the following instructions as well as
the exit device manufacturer’s instruc-
tions.
Warning
The combination of this lock has been factory preset, 2 & 4 depressed at the
same time, then 3 and then ENTER. For your security, the combination must be
changed at time of installation.
Warnings and Cautions
Important: Carefully inspect windows, doorframe, door, lights, etc.
to ensure that the recommended procedures will not cause damage. Kaba
Access Control’s warranty does not cover damages caused by installation.
Caution: Wear safety glasses when preparing door.
10-24X1
3
⁄4" Pan Head
Mounting Screw
10-24X2
1
⁄4" Pan
Head Mounting
Screw
1
3
⁄4"
2
1
⁄4"
10-24X
3
⁄4" Flat Head
Trim Plate Screw
3
⁄4"
8-32X1
5
⁄8" Connector
Screw
1
5
⁄8"
Mounting Bushing