Manualshelf

User's Manual

ManualsBrandsKab ManualsElectronicsRemote Controller
1234
3. Remove the plastic battery tab from the battery compartment in the back of the
remote control to activate the DC 12V Type A23 pre-installed battery.
ELECTRICAL RATINGS
Range Up to 50ft.
125Vac 60Hz 15 A General Purpose
125Vac 60Hz 15 A Resistive
1,000 W Tungsten
500 VA Electronic Ballast
120Vac 60Hz 8.3A Ballast.
1/2 HP
TO USE
1. To set up the receiver (outlet) with connecting device.
2. Removes the plastic battery tab from the battery compartment in the back of the
remote control to active the DC 12V Type A23 pre-installed battery.
3. Press "Clear" ON button on the transmitter to turn the "Clear" receiver ON and
press OFF button on the transmitter to turn the receiver OFF.
4. Press "Multi" ON button on the transmitter to turn the "Multi" receiver ON and
press OFF button on the transmitter to turn the receiver OFF.
5. Press "Both" ON button on the transmitter to turn the "Clear" and "Multi" receiver
ON and press OFF button on the transmitter to turn the receiver OFF.
Battery Handling and Usage
WARNING: Keep batteries away from children and pets.
• Follow the battery manufacturer's safety and usage instructions.
• Insert the battery observing the proper polarity (+/-) as indicated inside the Battery
Compartment.
CAUTION: Failure to properly align the battery polarity can cause personal injury
and/or property damage.