BLACKENED COPPER, BRUSHED NICKEL & CHROME TAP CARE, INSTALLATION AND GUARANTEE INFORMATION Model code: AVE4/BC, AVE4/BN & AVE4/CH Customer care helpline: 0117 938 1900 www.caple.co.
INSTALLATION GUIDE Thank you for purchasing your Caple tap. These taps have been manufactured and inspected to exacting standards and are guranted to give years of trouble free operation providing our care and installation guidelines have been followed.
hole - 35mm
INSTALLATION INSTRUCTIONS - Turn the spout and body so the tap is facing forwards, the screw on the spout indicates the rear of the body. The hot water connection should be on the left of the tap. - Ensure the hot and cold pipes are thoroughly flushed to remove any debris. - A 35mm hole is required in either the sink or worktop. - The fixing bolt must be screwed into the tap base, ensuring the threads of the bolt are not damaged in the process.
