Warranty

For Professional Technical Support call 1-844-242-2475 5
INSTALLING WELL APPLICATION
Shallow well systems are identified by one pipe going to the well, lake or river.
1. CASED WELL APPLICATION, 4” OR LARGER CASING (Fig.1)
A hole bored into the earth with machinery. Depths
range from a few feet to 25 feet. Common well diameters
are 4", 5", 6" and 8" for domestic water wells.
Parts you may need for this application
ITEM
DESCRIPITON
QTY
ITEM
DESCRIPITON
QTY
1
1in. Brass Foot Valve
1
10
3/4in. PVC MPT x S Male Adapter
2
2
1in. PVC MPT x S Male Adapter
4
11
3/4in. PVC Slip x Slip Union
1
3
Well Seal
1
12
1in. Galvanized Plug
1
4
1in. PVC TEE FPT x FPT x FPT
1
13
1in. PVC rigid Pipe
some
5
1in. PVC Slip x Slip Union
1
14
3/4in. PVC rigid Pipe
some
6
3/4in. CPVC CTC Socket Tee Fitting
1
15
1in. Discharge Priming Tee
1
7
3/4in. PVC 90-Degress S x S Elbow
1
16
1in. MIP x 3/4in. FIP PVC Bushing Fitting
1
8
1in. PVC 90-Degress S x S Elbow
1
17
20 Gal. or larger Tank
1
9
1in. x 3/4in. PVC Reducing Male Adapter
1
2. WELL POINT (DRIVEN POINT) APPLICATION (Fig.2)
Pipe with a pointed screen is driven into the ground below the
water table. The depth is usually less than 25 feet. Available
diameters are 1" through 2.