Specification

Information in this document is subject to change without notice.

• Rugged cast iron construction

• Shallow well application for water

at depths up to 25’ deep

• Heavy-duty, dual-voltage

115/230V motor, pre-set at 230V

• Self-priming after pump housing is

initially ﬁlled

• 30/50 pressure switch

• Preinstalled pressure gauge

Performance (GPM) at 40 PSI Discharge Pressure

Depth to Water

Max

pressure

shutoff

Voltage

Pressure switch

Model No. HP 0’ 5’ 10’ 15’ 20’ 25’ ON OFF

WPS05002K 1/2 7.2 6.5 6.0 5.5 5.0 4.5 66 PSI 230/115 30 50

WPS07502K 3/4 9.2 9.0 8.1 7.4 6.8 5.8 67 PSI 230/115 30 50

WPS10002K 1 14.0 12.6 12.0 10.5 9.2 7.0 67 PSI 230/115 30 50

WPS05002K 1/2 HP 7.2 GPM

WPS07502K 3/4 HP 9.2 GPM

WPS10002K 1 HP 14.0 GPM

Cast Iron, Lead Free

Shallow Well Jet Pumps

WARRANTY

YEAR

Certiﬁed Lead Free to:

NSF/ANSI/CAN 61

NSF/ANSI 372

PAGE 1
Cast Iron, Lead Free Shallow Well Jet Pumps WPS05002K 1/2 HP 7.2 GPM WPS07502K 3/4 HP 9.2 GPM WPS10002K 1 YEAR WARRANTY 14.
PAGE 2
Application Performance The shallow well jet pump can pump water where the water is located less than 25 feet vertically from the pump. Voltage 115/230 Hertz 60 Phase Single RPM 3450RPM Motor type Permanent Split Capacitor (PSC) Insulation Class B Circuit requirments 20/15 AMP Duty rating Continuous* Shaft seal Mechanical seal Motor Shaft Stainless steel Upper motor bearing Ball bearing Lower motor bearing Ball bearing WPS05002K 1/2 7/3.