Specification

Information in this document is subject to change without notice.

• Patented, compact, integrated

design is perfect for draining utility

sinks, laundry room sinks, and wet

bars.

• Easily mounts underneath the

sink eliminating the need for traps,

vents, or costly construction.

• Built-in sensor monitors the water

level to control the opening and

closing of the pump.

• Check valve (included) eliminates

leaks while removing water.

Thermoplastic

Utility Sink Pump

Performance

Discharge Flow (GPH)

Model No. HP 0’ 5’ 10’ 15’ Max. lift

UTS03303K

1/3 1700 1200 720 200 17’

WARRANTY

YEAR

UTS03303K 1/3 HP 1700 GPH

PAGE 1
Thermoplastic Utility Sink Pump UTS03303K 1/3 HP 1700 1 GPH YEAR WARRANTY • Patented, compact, integrated design is perfect for draining utility sinks, laundry room sinks, and wet bars. • Easily mounts underneath the sink eliminating the need for traps, vents, or costly construction. • Built-in sensor monitors the water level to control the opening and closing of the pump. • Check valve (included) eliminates leaks while removing water. Performance Discharge Flow (GPH) Model No.
PAGE 2
Application Performance Perfect for basement wet bars, laundryand utility sinks Voltage 115 Hertz 60 Phase Single RPM 3450 RPM Motor type Permanent Split Capacitor ( PSC) Insulation Class B Circuit requirments 15 AMP Duty rating Continuous* Shaft seal Mechanical seal Motor Shaft Stainless steel Upper motor bearing Ball bearing Lower motor bearing Ball bearing Cooling Fan cooled Motor protection Auto reset thermal overload protector Model UTS03303K Pump Specifications Discharge