Specification

Performance
Dimensions
Model HP Amps
Discharge
Height(ft)
0 5 10 15 20 25
Submersible 1/4 2.8
GPM 27 25 22 16 12 4
GPH 1600 1500 1300 950 700 210
Transfer 1/4 2.8
GPM 16 14.0 12.2 10.0 6.7 2.8
GPH 950 840 730 600 400 170
Application
Submersible utility pump
Voltage 115
Hertz 60
Phase Single
RPM 3450 RPM
Motor type
Permanent Split Capacitor
(PSC)
Insulation Class B
Circuit requirments 15 AMP
Duty rating Continuous*
Shaft seal Lip seal
Motor Shaft Stainless steel
Upper motor bearing Ball bearing
Lower motor bearing Ball bearing
Cooling Oil cooled
Motor protection
Auto reset thermal overload
protector
*For continuous,the water depth must be at least 6”to prevent the motor
from overheating
Pump Specifications
Discharge size 3/4” garden hose
Cord Length 10’
Cord type SJTW 18AWG/3C ,UL list
Pump Housing Reinforced thermoplastic
Pump Base Reinforced thermoplastic
Impeller material PPS Thermoplastic
Gasket Nitrile rubber
Solids handling 1/8” spherical
Liquid temp.range 32°-130°F
Operation Non-automatic
Fasteners Stainless steel
Maximum ow rate 27/16 GPM
Maximum head 30 ft
Max pressure 13.2 psi
GP Enterprises Co., Ltd,
1436 Brook Drive, Downers Grove, IL 60515 www.K2pumps.com © 2021 GP Enterprises Co., Ltd.
Customer Service: 844-242-2475 K2Spec-56 (Rev. 3-19-22)
Transfer
Submersible