Instructions / Assembly

2 For Professional Technical Support call 1-844-242-2475
PERFORMANCE
Model
HP
GPH of Water @ Total Feet Of Lift
Max.
Lift
0 ft.
5 ft.
10 ft.
15 ft.
20 ft.
25 ft.
SPA02501VDK/SPA02501TDK
1/4
3450
3200
2800
2100
1500
200
26 ft.
SPA03301VDK/SPA03301TDK
1/3
3600
3400
3000
2500
1900
1000
28 ft.
SPA05001VDK/SPA05001TDK
1/2
4100
3800
3500
2900
2300
1600
29 ft.
SPI05004VDK/SPI05004TDK
1/2
4600
4320
3840
3060
1800
-
22 ft.
SPI07504VDK/SPI07504TDK
3/4
5150
4800
4320
3660
2580
-
25 ft.
SPI10004VDK/SPI10004TDK
1
5500
5160
4680
4200
3480
2340
30 ft.
SPS03301VDK/SPS03301TDK
1/3
4000
3700
3300
2800
1860
-
25 ft.
SPS05001VDK/SPS05001TDK
1/2
4200
4000
3600
3200
2400
1200
29 ft.
SPS07501VDK/SPS07501TDK
1
5100
4800
4500
4000
3300
2400
32 ft.
SAFETY INSTRUCTIONS
1. Do not pump flammable or explosive liquids such as oil, gasoline, kerosene, ethanol, etc. Do not use in the
presence of flammable or explosive vapors. Using this pump with or near flammable liquids can cause an explosion
or fire, resulting in property damage, serious personal injury, and/or death.
2. ALWAYS disconnect the power to the pump before servicing.
3. Do not touch the motor housing during operation. The motor is designed to operate at high temperatures. Do not
disassemble the motor housing.
4. Do not handle the pump or pump motor with wet hands or when standing on a wet or damp surface, or in water
before disconnect the power.
5. Release all pressure and drain all water from the system before servicing any component.
6. Secure the discharge line before starting the pump. An unsecured discharge line will whip, possibly causing
personal injury, and/or property damage.
7. Extension cords may not deliver sufficient voltage to the pump motor. Extension cords present a life threatening
safety hazard if the insulation becomes damaged or the connection ends fall into water. The use of an extension
cord to power this pump is not permitted.
8. Wear safety goggles at all times when working with pumps.
9. This unit is designed only for use on 115 volts (single phase), 60 Hz, and is equipped with an approved 3-conductor
cord and 3-prong grounded plug. Do not remove the ground pin under any circumstances. The 3-prong plug must
be directly inserted into a properly installed and grounded 3-prong, grounding-type receptacle. Do not use this
pump with a 2-prong wall outlet. Replace the 2-prong outlet with a properly grounded 3-prong receptacle (a GFCI
outlet) installed in accordance with the National Electrical Code and local codes and ordinances. All wiring should
be performed by a qualified electrician.
10. Protect the electrical cord from sharp objects, hot surfaces, oil, and chemicals. Avoid kinking the cord. Do not use
damaged or worn cords.
11. Failure to comply with the instruction and designed operation of this unit may void the warranty. ATTEMPTING TO
USE A DAMAGED PUMP can result in property damage, serious personal injury, and/or death.
12. Ensure that the electrical circuit to the pump is protected by a 15 Amp fuse or circuit breaker.
13. Do not lift the pump by the power cord.
14. Know the pump and its applications, limitations, and potential hazards.
15. Secure the pump to a solid base. This will aid in keeping the pump in a vertical orientation. This is critical in keeping
the pump operating at maximum efficiency. It will also help prevent the pump from clogging resulting in premature
failure.