Use and Care Manual

4 For Professional Technical Support call 1-844-242-2475
PACKAGE CONTENTS
Part Description QTY
A Pump 1
B Union Nut 2
C Union Adapter 2
D O-ring 2
MATERIALS REQUIRED (NOT INCLUDED)
Additional items needed QTY
Teflon tape As needed
Rigid pipe As needed
Ball Valve As needed
Union As needed
Elbow As needed
Adapter 2
Tee As needed
PVC cement 1
IAPMO Certified Anti-entrapment Cover As needed
SPECIFICATIONS
Power supply 230V, 60 HZ., 15 Amp Circuit
Liquid temp. range 32 to 100°F (0- 38°C)
Discharge size 1 -1/2 in. NPT thread with adaptor
INSTALLATION
Only qualified, licensed personnel should install pump and wiring.
The pump mount must be located away from corrosive or flammable chemicals.
THREADED CONNECTIONS
Use only PTFE tape or equivalent on threaded plumbing
connections. Other pipe compounds may damage threads. Do
not use silicone or petroleum based compounds. Do not over tighten.
Hand tightening plus 1/2 turn is sufficient.