Quick Start Guide

ManualsBrandsK03-100-100 ManualsElectronicsCEL FI COMPASS

Cel-Fi COMPASS & Cel-Fi WAVE PRO

are now linked and ready to operate

IMPORTANT: Your Cel-Fi COMPASS is electronic equipment.

The Cel-Fi COMPASS must be kept indoors and in a dry, cool, well ventilated area.

Connect the Whip Antenna

to the MAIN port on the top

of the unit.

Insert an active SIM card

in the slot at the bottom

of the unit.

Connect the Whip Antenna

Quick Installation

Insert SIM Card

222

Download and Install Cel-Fi WAVE

PRO App

Download and install the app Cel-Fi

WAVE PRO available on both smart-

phones and tablets from the follow-

ing app stores.

Connect Cel-Fi COMPASS and

Cel-Fi WAVE PRO

SETUP MODE

1) Connect Cel-Fi COMPASS to the LAN using an

ethernet cable.

2) In Cel-Fi WAVE PRO, select “Internet” then select

“Download Software”. The app will check for

updates in the cloud. An exclamation mark “!” will

appear if there are software updates available.

Follow the instructions on the screen of your

TLSRIXSHS[RPSEHXLIƤPIXS'IP*M'314%77

There are two modes to this feature depending on what Cel-Fi COMPASS is connected to:

INSTALL MODE

1) Connect Cel-Fi COMPASS to a Cel-Fi QUATRA Network Unit.

2) 7IPIGXŰ'IP*M59%86%űSVŰ'IP*M59%86%*M\IH-4űMJEƤ\IH

IP has been setup already.

3) From the main menu select “Software Update”, the app will

display a table with the NUs and CUs attached and the current

software versions. Press “install Now” to start the software

upgrade.

Make sure Cel-Fi COMPASS is powered

on and the “Status” light is solid green.

4a) Enable Bluetooth in your phone and

launch Cel-Fi WAVE PRO.

4b) If a device is found, the app will

automatically connect to it and

proceed. If multiple devices are

found, then a list is displayed and

you can select which device to

connect to.

4c) Enter a name for your device, If you

skip this option the serial number

will be the name of your device.

Select Your Compass

935731000077

986214189003

922541000085

940123882101

Search Again

The Cel-Fi COMPASS and Cel-Fi

WAVE PRO work together to improve

cellular coverage installations.

Customers who want to setup their Cel-Fi QUATRA

SVXSVYRMRERSJƥMRIQSHIGERYWIXLMW

XSSP XS EGXMZEXI GSRƤKYVI FEWMG WIXXMRKW ERH

update the system software.

For customers with the Cel-Fi Antenna Mount, the

%RXIRRE4SMRXMRKJIEXYVI[MPPƤRHXLIFIWXHMVIGXMSR

to aim donor antennas. Cellular coverage reports

and speed tests can be run on-site to help optimize Cel-Fi systems.

Installation

AT&T

935731000077

IP Settings

network settings

3TIVEXSV'SRƤKW

operator ports

Antenna Settings

internal/external

Band Settings

relay bands

Deactivate System

stop relaying

Software Update

offline update

SIM Card

Download Software

Type SKU

NU 590NQ34TTN02TNN07BL4

CU 590NQ34TTN02TNN07BL4

Check for UPdatres

The software is ready to install. Connect the

Compass to your QUATRA.

Make sure the Cel-Fi COMPASS is connected to the

donor antenna using the SMA to N adaptor.

Set the antenna to a position on the mount then press

the corresponding number in the app. Wait for the app

to gather data to move the antenna to next position.

Cel-Fi COMPASS & Cel-Fi WAVE PRO

are now linked and ready to operate

IMPORTANT: Your Cel-Fi COMPASS is electronic equipment.

The Cel-Fi COMPASS must be kept indoors and in a dry, cool, well ventilated area.

Connect the Whip Antenna

to the MAIN port on the top

of the unit.

Insert an active SIM card

in the slot at the bottom

of the unit.

Connect the Whip Antenna

Quick Installation

Insert SIM Card

222

Download and Install Cel-Fi WAVE

PRO App

Download and install the app Cel-Fi

WAVE PRO available on both smart-

phones and tablets from the follow-

ing app stores.

Connect Cel-Fi COMPASS and

Cel-Fi WAVE PRO

SETUP MODE

1) Connect Cel-Fi COMPASS to the LAN using an

ethernet cable.

2) In Cel-Fi WAVE PRO, select “Internet” then select

“Download Software”. The app will check for

updates in the cloud. An exclamation mark “!” will

appear if there are software updates available.

Follow the instructions on the screen of your

TLSRIXSHS[RPSEHXLIƤPIXS'IP*M'314%77

There are two modes to this feature depending on what Cel-Fi COMPASS is connected to:

INSTALL MODE

1) Connect Cel-Fi COMPASS to a Cel-Fi QUATRA Network Unit.

2) 7IPIGXŰ'IP*M59%86%űSVŰ'IP*M59%86%*M\IH-4űMJEƤ\IH

IP has been setup already.

3) From the main menu select “Software Update”, the app will

display a table with the NUs and CUs attached and the current

software versions. Press “install Now” to start the software

upgrade.

Make sure Cel-Fi COMPASS is powered

on and the “Status” light is solid green.

4a) Enable Bluetooth in your phone and

launch Cel-Fi WAVE PRO.

4b) If a device is found, the app will

automatically connect to it and

proceed. If multiple devices are

found, then a list is displayed and

you can select which device to

connect to.

4c) Enter a name for your device, If you

skip this option the serial number

will be the name of your device.

Select Your Compass

935731000077

986214189003

922541000085

940123882101

Search Again

The Cel-Fi COMPASS and Cel-Fi

WAVE PRO work together to improve

cellular coverage installations.

Customers who want to setup their Cel-Fi QUATRA

SVXSVYRMRERSJƥMRIQSHIGERYWIXLMW

XSSP XS EGXMZEXI GSRƤKYVI FEWMG WIXXMRKW ERH

update the system software.

For customers with the Cel-Fi Antenna Mount, the

%RXIRRE4SMRXMRKJIEXYVI[MPPƤRHXLIFIWXHMVIGXMSR

to aim donor antennas. Cellular coverage reports

and speed tests can be run on-site to help optimize Cel-Fi systems.

Installation

AT&T

935731000077

IP Settings

network settings

3TIVEXSV'SRƤKW

operator ports

Antenna Settings

internal/external

Band Settings

relay bands

Deactivate System

stop relaying

Software Update

offline update

SIM Card

Download Software

Type SKU

NU 590NQ34TTN02TNN07BL4

CU 590NQ34TTN02TNN07BL4

Check for UPdatres

The software is ready to install. Connect the

Compass to your QUATRA.

This feature is designed to work with the Cel-Fi Mount.

Make sure the Cel-Fi COMPASS is connected to the

donor antenna using the SMA to N adaptor.

Set the antenna to a position on the mount then press

the corresponding number in the app. Wait for the app

to gather data to move the antenna to next position.

This feature is designed to work with the Cel-Fi Mount.

Software Update

Antenna Pointing Algorithm

MAIN

MIMO

NOTE: Once the app has two or more

data points, the app will recommend

the strongest signal band

Antenna Positioning

Rotate your antenna to a position on the dial

mount and tap the corresponding number

button. You will need to test 2 or more

positions to see the results. Learn more.

NOTE: Once the app has two or more

data points, the app will recommend

the strongest signal band

Antenna Positioning

Rotate your antenna to a position on the dial

mount and tap the corresponding number

button. You will need to test 2 or more

positions to see the results. Learn more.

MAIN

MIMO