User's Manual

U
M10936
P
N7150 User Manual
UM
10936 All information provided in this document is subject to legal disclaimers.
U
ser manual
CO
MPANY PUBLIC
Rev. 2.0 — 6 November 2020
348120
54 of 127
C
ommand
M
ain Parameters
V
alues
P
F_RC_CODE
RF_DISCOVER_CMD RF Technology & Mode NFC_F_PASSIVE_POLL_MODE
6.3 T4T & ISO-DEP Tags/Cards
[
NCI] allows the data exchange with a T4T tag or an ISO-DEP tag by using the Frame RF
Interface or the ISO-DEP RF Interface, so there is no need to define a proprietary RF
interface here.
6.
3.1 Access through the Frame RF Interface
T
he Frame RF interface allows full access to all the Tags based on NFC-A & NFC-B
technology and supporting the ISO-DEP protocol, assuming that the ISO-DEP protocol is
fully handled by the DH:
T
able 44. Tag/Cards accessible over the Frame RF Interface
T
ag/Card
A
ccess through the
Frame RF Interface
T
4T 
MIFARE DESFire 
M
IFARE Plus for Security levels 3 
JCOP-based smart cards 
H
ere are the commands and configuration parameters to prepare the Reader/Writer Mode
for ISO-DEP Tags/Cards through the Frame RF Interface for technology NFC-A:
T
able 45. Config. seq. for R/W of NFC-A / ISO-DEP through the Frame RF interface
C
ommand
M
ain Parameters
V
alues
RF
_DISCOVER_MAP_CMD *
RF Protocol PROTOCOL_ISO-DEP
M
ode Poll
R
F Interface Frame
CORE_SET_CONFIG_CMD PA_BAIL_OUT
1
RF
_DISCOVER_CMD RF Technology & Mode NFC_A_PASSIVE_POLL_MODE
* No
te: RF_DISCOVER_MAP_CMD is optional since the mapping to Frame RF Intf. is done by default
1
t
his parameter is not active in PN7150: it can be read/written, but PN7150 will always
behave with Bail Out in NFC-A, whatever the value written by the DH to that parameter.
H
ere are the commands and configuration parameters to prepare the Reader/Writer Mode
for ISO-DEP Tags/Cards through the Frame RF Interface for technology NFC-B:
Table 46. Config. seq. for R/W of NFC-B / ISO-DEP through the Frame RF interface
C
ommand
M
ain Parameters
V
alues
RF
_DISCOVER_MAP_CMD * RF Protocol PROTOCOL_ISO-DEP