User's Manual

U
M10936
P
N7150 User Manual
UM
10936 All information provided in this document is subject to legal disclaimers.
U
ser manual
CO
MPANY PUBLIC
Rev. 2.0 — 6 November 2020
348120
49 of 127
6.
1.5 [PN7150-NCI] extension: List of REQs & RSPs
I
n this section, the following acronyms are used:
T
able 30. Acronyms definition
Ac
ronym
D
escription
T
1T NFC FORUM Type 1 Tag (based on Topaz/Jewel)
MF
MIFARE family, not ISO-DEP compliant, including T2T, MIFARE Ultralight (std or C),
MIFARE Classic and MIFARE Plus for Security Level 1 & 2.
M
FC MIFARE Classic and MIFARE Plus for Security Level 1 & 2.
T
he added REQuests/ReSPonses pairs are listed in the following table:
T
able 31. List of REQuests & ReSPonses
RE
Q/RSP Name
ID P
aram 1
P
aram 2
P
aram 3
Da
ta
D
escription
XCHG_DATA_REQ 0x10 None None None Yes MFC: DH sends Raw data to the NFCC, which
encrypts them before sending them to MFC.
T1T/T2T: DH sends Raw data to the NFCC,
which forwards them in plain to the Tag.
XCHG_DATA_RSP 0x10 N/A N/A N/A Yes MFC: DH gets Raw data once RF data from MFC
are decrypted by the NFCC, if successful.
T1T/T2T: DH gets Raw plain data once the
NFCC receives RF data from the Tag, if
successful.
M
F_SectorSel_REQ 0x32 Sector
Address
None None No T2T & MFU only: DH Sends the address of the
Block to select.
M
F_SectorSel_RSP 0x32 N/A N/A N/A No T2T & MFU only: DH gets the “Sector Select”
response status
M
FC_Authenticate_REQ 0x40
Sector
Address
Key
Selector
Key
(optional)
No
DH asks NFCC to perform MFC Authenticate
command.
MFC_Authenticate_RSP 0x40 N/A N/A No DH gets the MFC Authenticate command status
A
ll these REQs & RSPs are detailed in the next sections.
6.
1.6 [PN7150-NCI] extension: raw data exchange REQs & RSPs
Table 32. XCHG_DATA_REQ
R
EQ_ID
RE
Q Name
Number of
p
arameter(s)
Presence
o
f data
D
escription
0x
10 XCHG_DATA_REQ 0 Yes MFC: DH sends Raw data to the NFCC, which encrypts
them before sending them to MFC.
T1T/T2T: DH sends Raw data to the NFCC, which
forwards them in plain to the Tag.