K 2.300 - K 2.399 Operating Instructions Before first use of the unit read these operating instructions and act in accordance with them.
Contents General information . . . . . . . . . . . . . .3 Safety instructions . . . . . . . . . . . . . . .4 Description of the Appliance . . . . . . .6 Operation . . . . . . . . . . . . . . . . . . . . . .8 Transport . . . . . . . . . . . . . . . . . . . . . 10 Storage. . . . . . . . . . . . . . . . . . . . . . . 10 Maintenance and care . . . . . . . . . . . 11 Troubleshooting . . . . . . . . . . . . . . . . 11 Helpline . . . . . . . . . . . . . . . . . . . . . . 12 Technical specifications . . . . . . . .
General information Dear Customer, Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent owners. Proper Use This high-pressure cleaner is designed for domestic use only: – to clean machines, vehicles, buildings, tools, facades, terraces, garden equipment etc. using a high-pressure water jet (and detergents if required). – with accessories, replacement parts and detergents approved by KÄRCHER.
Safety instructions Danger Never touch the mains plug and the socket with wet hands. The appliance must not be used if the power cord or important parts of the appliance, e.g. high-pressure hoses, trigger gun or safety devices are damaged. Check the power cord and mains plug for damage before every use. If the power cord is damaged, please arrange for it to be replaced immediately by an authorised repair agent or a skilled electrician Check the high-pressure hose for damage before every use.
Wear protective clothing and safety goggles to protect against splash back containing water or dirt. Caution In case of extended downtimes, switch the appliance off at the main switch / appliance switch or remove the mains plug. Do not operate the appliance at temperatures below 0 °C. Observe a distance of at least 30 cm when using the jet to clean painted surfaces to avoid damaging paintwork. Never leave the appliance unattended when it is in operation.
Description of the Appliance These operating instructions describe the maximum equipment. Depending on the model, there are differences in the scopes of delivery (see packaging).
"CLICK" English 7
Operation Before Startup Mount loose parts delivered with appliance prior to start-up. Illustrations on Page 6 and 7 Illustration Î Insert the transport wheels and lock them. Illustration Î Attach the transport handle /carrying handle. Illustration Î Pull out the clamp for the high-pressure hose from the hand spray gun (e.g. a Philips screwdriver). Illustration Î Connect high pressure hose to trigger gun. Î Push the clamp in until it locks. Check the secure connection by pulling on the high-pressure hose.
Note: Release the lever of the trigger gun; the device will switch off again. High pressure remains in the system. Spray lance with high pressure nozzle For normal cleaning tasks. Not suitable for use with detergents. Spray lance with Dirtblaster For particularly dirty items or areas. Not suitable for use with detergents. Spray pipe with pressure regulation (Vario Power) Carrying out the most common cleaning tasks. The work pressure can be stagelessly regulated between "Min" and "Max".
Transport Caution In order to prevent accidents or injuries, keep in mind the weight of the appliance during transport (see Specifications). When transporting by hand Î Pull the appliance by its transport handle. Î Lift appliance by the carrying handle and carry it. When transporting in vehicles Î Empty detergent tank. Î Secure the appliance against shifting and tipping over.
Troubleshooting You can rectify minor faults yourself with the help of the following overview. If in doubt, please consult the authorized customer service. Danger Turn off the appliance and remove the mains plug prior to any care and maintenance work. Repair works may only be performed by the authorized customer service. Appliance is not running Î Pull on the lever of the trigger gun; the device will switch on.
Technical specifications Electrical connection Voltage 220-240 V 1~50/60 Hz 6A 1,4 kW IP X5 II 13 A Power consumption Connected load Protection class Protective class Mains fuse (slow-blow) Water connection Max. feed temperature 40 °C Min. feed volume 7 I/min Feed pressure 0,2-1,2 MPa Performance data Working pressure 8 MPa Max.
Notes English 13
Spare Parts 14 English
English 15
