K 2.110 M Operating Instructions Before first use of the unit read these operating instructions and act in accordance with them. 5.963-140.
Contents General information Safety instructions Operation Maintenance and care Troubleshooting Helpline Technical specifications CE declaration Spare Parts Environmental protection 2 3 4 8 8 9 9 10 11 The packaging material can be recycled. Please do not place the packaging into the ordinary refuse for disposal, but arrange for the proper recycling. Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old appliances.
Safety instructions Danger Never touch the mains plug and the socket with wet hands. The appliance must not be used if the power cord or important parts of the appliance, e.g. high-pressure hoses, trigger gun or safety devices are damaged. Check the power cord and mains plug for damage before every use. If the power cord is damaged, please arrange for it to be replaced immediately by an authorised repair agent or a skilled electrician Check the high-pressure hose for damage before every use.
Caution Do not operate the appliance at temperatures below 0 °C. Observe a distance of at least 30 cm when using the jet to clean painted surfaces to avoid damaging paintwork. Never leave the appliance unattended when it is in operation. Make sure that the power cable or extension cables are not damaged by running over, pinching, dragging or similar. Protect the power cable from heat, oil, and sharp edges. All current-conducting parts in the working area must be protected against jet water.
English 5
Before Startup Water supply Mount loose parts delivered with appliance prior to start-up. Illustrations on Page 5 Illustration Î Insert the transport handle and screw in. Illustration Î Insert the transport wheels and lock them. Î Attach the wheel caps. Illustration Î Pull out the clamp for the high-pressure hose from the trigger gun (e.g. a small screwdriver). Illustration Î Connect high pressure hose to trigger gun. Î Push the clamp in until it locks.
Operation 몇 Danger The trigger gun is subjected to a recoil force when the water jet is discharged. Make sure that you have a firm footing and are also holding the trigger gun and spray lance firmly. Î Unlock the lever on the trigger gun. Î Pull on the lever of the trigger gun; the device will switch on. Note: Release the lever of the trigger gun; the device will switch off again. High pressure remains in the system. Spray lance with pressure regulation Carrying out the most common cleaning tasks.
Maintenance and care Danger Turn off the appliance and remove the mains plug prior to any care and maintenance work. Maintenance The appliance is maintenance-free. Storage Prior to longer periods of storage, e.g. in the winter: Î Completely drain all water from the appliance: Switch the appliance on with detached high-pressure hose and detached water supply (max. 1 minute) and wait, until no more water exits at the high-pressure connection. Turn off the appliance.
Helpline KÄRCHER UK Limited operate a helpline allowing customers to discuss any problems experienced with our products. The helpline operates during normal business hours and may be busy at peak periods.If you have difficulty getting through we would ask that you try to contact us again later in the day. The helpline number is 01295 752200, open from 8.30am to 5.00pm Monday to Friday.
CE declaration We hereby declare that the machine described below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval. Product: High-pressure cleaner Type: 1.
Spare Parts English 11
