Installation Guide

25
Master Valve Installation (Water supply off mains water)
The purpose of the master valve is to shut off the water supply to the irrigation system
when there is a faulty valve or none of the stations are operating correctly. It’s used
like a back-up valve or fail safe device and is installed at the start of the irrigation
system where it is connected to the water supply line.
Power Supply Connections
COM
COM COM
SENS PUMP 1 ST1 ST2 ST3 ST4 ST5 ST6 ST7 ST8 ST9 ST10 ST11 ST12
ST13 ST14 ST15 ST16 ST17 ST18 ST19 ST20 ST21 ST22 ST23 ST24 PUMP 2
COM
COM COM
SENS PUMP 1 ST1 ST2 ST3 ST4 ST5 ST6
PUMP 2
INSTALLATION INSTRUCTIONS
Rain sensor installation
0207P8011_RPS624_Instruction_Manual-FINAL-USA.indd 25 21/08/2015 9:13 am