Operation Manual

INSTALLATION: 3208-WRFS

1. Install the RF Module receiver (Model 3206) into your Pro EX 2.0 Controller.

2. Pair your 3208 Wireless Rain-Freeze Sensor with the Pro EX 2.0 Controller.

a. Place dial on pin position. Press UP button until “LEARN” is displayed on the LCD.

b. Press the START button, and the word “LEARN” will ash.

d. The controller will display “LEARNED” once the wireless

rain sensor has been paired with the controller.

START

LEARN

LEARNED

Sensor

PGM

c. Press the Manual Test Pin

for three seconds to enable

the wireless rain sensor to

transmit the signal