User manual

Problem Possible cause Solution
The door has been opened
often.
Open the door only if necessa-
ry.
If the advice does not lead to
the desired result, contact the
nearest Authorised Service
Centre.
Replacing the lamp
The appliance is equipped with
a longlife LED interior light.
It is strongly recommended to
use original spare parts only.
Use LED bulbs (E14 base) only.
The maximum power is shown
on the lamp unit.
CAUTION! Disconnect the plug
from the mains socket.
1.
Remove the screw from the lamp cover.
2.
Remove the lamp cover (refer to the
illustration).
3. Replace the lamp with the one that has
identical characteristics and is
specifically designed for household
appliances.
4. Install the lamp cover.
5. Tighten the screw to the lamp cover.
6. Connect the plug to the mains socket.
7. Open the door.
Make sure that the light comes on.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
assembly instructions.
3.
If necessary, replace the defective door
gaskets. Contact the Authorised
Service Centre.
INSTALLATION
Location
Refer to the assembly
instructions for the installation.
To ensure best performance, install the
appliance well away from sources of heat
such as radiators, boilers, direct sunlight
etc. Make sure that air can circulate freely
around the back of the cabinet.
Positioning
Install the appliance in a dry, well ventilated
indoors where the ambient temperature
corresponds to the climate class indicated
on the rating plate of the appliance.
24