User manual

The upper basket
The upper basket is
designed for saucers, salad
bowls, cups, glasses, pots
and lids.
Arrange items on and
underneath the cup racks so
that water can reach all
surfaces.
Glasses with long stems can
be placed upside down in the
cup racks.
The cup racks can be
adjusted in three different
positions to improve loading
flexibility.
For glasses with long stems
(according to the size and
dimensions), set the glass
holder to the left or right
position.
The central rows of prongs
can be easily lowered to
improve loading flexibility.
Light items (plastic bowls
etc.) must be loaded in the
upper basket and arranged
so they do not move.
Before closing the door, ensure that the spray arms can
rotate freely.
Adjusting the height of the upper basket
If washing very large plates you can load them in the lower
basket after moving the upper basket to the higher position.
To move to the higher position proceed as
follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards until the mechanism is
engaged and the basket is stable.
Attention!
Never lift or lower the
basket on one side only
With the upper basket
raised we recommend to
adjust the cup racks in the
lowest position.
To lower the basket to the original position
proceed as follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards and then allow the
mechanism to drop back down slowly, keeping hold of it.
After loading your machine always close the door, as an
open door can be a hazard.
13
With upper basket raised 33 cm
With upper basket lowered 29 cm
Maximum height of the dishes in lower basket