User manual

9
Loading your appliance
Before placing dishes in the machine, remove any scraps
of food, to avoid clogging the filters and consequently
reducing the performance.
Do not load very small items which can fall
through the baskets.
Open the door and slide out the baskets to load the
dishes.
The lower basket
The lower basket is designed to take saucepans, lids,
plates, salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around
the edge of the basket, ensuring that the upper spray arm
can turn freely.
The two rear rows of prongs on the lower basket can be
easily lowered to allow you to load pots, pans and bowls.
To lower the prongs:
- Slightly pull them upward and let them drop down (see
picture).
- To bring them back to the standing position, just pull
them up again.
The cutlery basket
Long bladed knives stored in an upright
position are a potential hazard.
Long and/or sharp items of cutlery such as
carving knives must be positioned horizontally
in the upper basket.
Take care when loading or unloading sharp
items such as knives.
Cutlery should be placed in the removable cutlery basket
with the handles facing downwards. If the handles
protrude from the bottom of the basket, obstructing the
lower spray arm, load the cutlery with the handles facing
upwards.
Mix spoons with other cutlery to prevent them from
sticking together.
For best results we recommend to use the cutelry grid
provide (if the size and dimensions of the cutlery allow it).
Removable knife basket
Long and/or sharp items of cutlery such as carving
knives must be placed horizontally in the removable
knife basket, which is positioned at the rear of the upper
basket.
Using your appliance
UI49
UI19
UI18
UI04
UI53
UI71