User manual

5."Programme selector" button
To select the required programme, press this
button until the number corresponding to the
chosen programme appears in the digital
display (see "Washing programmes" chart).
6. "Economy drying" button
When this button is pressed, the last rinse is not
heated, with a significant saving in electrical
energy. The corresponding pilot light comes on.
In this case, the dishes are not dried
automatically by the dishwasher.
If the pilot light is not on, the water of the
last rinse will always be heated up to 65°C.
7. "Delay start" button
Allows the start of the programme to be delayed
by a minimum of 1 hour, up to 9 hours.
How to set the "Delay start":
When the button is pressed, the number "0"
appears in the display.
Press the button again to select the number of
hours by which you wish to delay the
programme start, up to a maximum of 9.
E.g.: if you have selected number "2", the wash
programme will start in 2 hours time.
To cancel the delay start set, press the button
until the number "0" appears.
Close the dishwasher door to start the
countdown: a long audible signal (about one
second) informs you that the function is active.
If you open the door you will see, in the display,
how long there is to go (in hours) before the
programme starts. A flashing dot in the digital
display means that the delay start function has
been activated.
Opening the door has no effect on a countdown
which has already been started.
If, during the countdown, you wish to see the
programme number selected in the display,
press the “Programme selector” button.
If, after having started the countdown by closing
the dishwasher door, you wish to cancel the
delay start, press the “Cancel/Programme
change” button for about 2 seconds until the
short “instruction accepted” signal is heard.
8. "Cancel/Change programme"
button
If you wish to cancel a programme which is
already running or a setting which has just been
made, press this button for about 2 seconds
until the short "instruction accepted" signal is
heard.
The number "1" for the first selectable
programme reappears in the digital display
whilst the programme selector light flashes, to
indicate that the dishwasher has been reset and
that a new programme and new options may be
selected.
9. "Intensive" programme indicator
light
This pilot light comes on when the most
energetic programme is selected (nr. 2
INTENSIVE PROGRAMME 70°c) with hot
prewash, suitable for pans and particularly dirty
crockery.
6
PCP19GB
ENGLISH