User manual

44
Deactivation of the inflow of rinse aid
(The dishwasher must be switched off)
When the inflow of rinse aid has been deactivated, also
the rinse aid indicator light on the control panel is
automatically deactivated.
1. Press the On/Off push button, all indicator lights of the
programme push buttons will illuminate (setting mode).
2. Press simultaneously function push buttons 2 and 3, the
indicator lights of the function push buttons 1, 2 and 3 start
flashing.
3. Press the function push button 2, the indicator lights of
function push buttons 1 and 3 turn off while the indicator
light of the push button 2 goes on flashing, at the same time
the "end of programme" indicator light illuminates
indicating that the inflow of rinse is active.
4. To deactivate the inflow of rinse aid, press again the
function push button 2, the "end of programme" indicator
light turns off, indicating that the inflow of rinse aid has been
deactivated.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off push button or wait about 60 seconds
after which the dishwasher will automatically return to
setting mode.
To activate again the inflow of rinse aid simply follow the above
operations until the end of programme indicator lights
illuminates.