User manual

Function buttons: in addition to the dishwashing
programme selected, the following functions can also be set
with the help of these buttons:
- water softener setting,
- deactivation/activation of the inflow of rinse aid,
- deactivation/activation of the audible signals.
- cancel a washing programme in progress.
"Programme selection" buttons: allows the selection
of the desired washing programme (see "Washing
programmes" chart).
The digital display indicates:
- the level of hardness to which the water softener is set,
- if the audible signals are activated/deactivated,
- if the rinse aid inflow is activated/deactivated,
- the approximative remaining time of the running programme,
- fault codes concerning malfunction of the dishwasher.
Indicator lights: have the following meanings:
"3 in 1" button : This appliance is equipped with the
function 3 in 1, that allows the use of the "3 in 1" combi
detergent tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Once selected this function (button indicator light illuminated )
it will remain active also for the following washing programmes,
to deactivate the function, press the button (button indicator
light off).
Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
- Setting of the water softener
- End of programme
- Something not working with the machine
Deactivation/activation of the audible signals
(The dishwasher must be switched off)
Factory setting: audible signals activated
1. Press the On/Off button. All programme selection buttons
indicator lights will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated, this means that a washing programme has
been set. The programme must be cancelled: press
simultaneously the function buttons 2 and 3 for about 2
seconds, the indicator light of the set programme button
starts flashing for about 2 seconds. After about 2 seconds
the indicator lights of all the programme selection buttons
will illuminate indicating that the set programme has been
cancelled and that the machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, the
indicator lights of the function buttons 1, 2 and 3 start
flashing.
3. Press the function button 3, the indicator lights of function
buttons 1 and 2 turn off while the indicator light of the button
3 goes on flashing, the digital display indicates the current
setting.
4. To change the current setting, press again the function
button 3, the digital display will indicate the new setting.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
7
Audible signals deactivated
Audible signals activated (factory set)
The control panel
Function buttons
Digital display
Programme selection
buttons
Indicator lights
On/Off button
"3 in 1" button
Salt refilling indicator light, illuminates when the salt
has run out and needs replenishing.
Rinse aid refilling indicator light, illuminates when
the rinse aid has run out and needs replenishing.
3 : 1 Illuminates when the 3 in 1 function is active.