User manual

How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
the programme button until the
indicator starts to flash and the
indicator
comes on with fixed light.
2. Wait until the indicator goes off and
the indicator starts to flash. The
indicator continues to flash. The
intermittent flashing of the indicator
refers to the current set level.
E.g. 5 flashes + pause + 5 flashes =
level5.
3.
Press programme button again and
again to change the setting. Each time
you press programme button the level
number increases. After level 10 you will
start again from level 1.
4.
Press the on/off button to confirm the
setting.
Acoustic signals
Acoustic signals sound when a malfunction
of the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default this acoustic signal is deactivated
but it is possible to activate it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
the programme button until the
indicator
starts to flash and the
indicator comes on with fixed light.
2.
Press immediately the programme
button.
The indicator comes on with
fixed light.
The indicator
starts to flash.
3.
Wait until the indicator goes off. The
indicator continues to flash.
The end indicator indicates the
current setting: End indicator off =
Acoustic signal off.
4.
Press the programme button to change
the setting.
End indicator on = Acoustic signal
on.
5. Press the on/off button confirm the
setting.
OPTIONS
Desired options must be
activated every time before you
start a programme. It is not
possible to activate or deactivate
options while a programme is
running.
Not all options are compatible
with each other. If you have
selected non compatible options,
the appliance will automatically
deactivate one or more of them.
Only the indicators of the options
still active will stay on.
Half Load
With this option you can wash a small load
of tableware and cookware.
The option decreases the programme
duration and the consumption of water and
energy.
Load both baskets and use less quantity of
detergent.
How to activate Half Load
Press Half Load, the related indicator
comes on.
8