User manual

3 Salt container
4 Detergent dispenser
5 Rinse aid dispenser
6 Rating plate
7 Filters
8 Lower spray arm
9 Upper spray arm
Control panel
45
32
1
BA
1 On/off button
2 Programme indicator lights
3 Indicator lights
4 Programme button
5 Half-load button
Indicator lights
End-of-programme The indicator comes on when:
• The washing programme is completed.
• You adjust the level of the water softener.
• You activate/deactivate the audible signals.
• There is a malfunction of the appliance.
Rinse aid
1)
The indicator comes on when it is necessary to fill the rinse aid
dispenser.
Salt
1)
It comes on when it is necessary to fill the salt container. Refer to
'Use of dishwasher salt'.
After you fill the container, the salt indicator light can stay on for
some hours. This does not have an unwanted effect on the oper-
ation of the appliance.
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing
programme operates.
On/off button
Press this button to activate or deactivate
the appliance.
Programme lights A and B
These lights have also an auxiliary function
when you:
• Adjust the level of the water softener.
• Deactivate/activate the audible signals.
Programme selection/cancel button
Use the programme selection/cancel button
for these operations:
• To set the washing programme. Refer to
the chapter 'Setting and starting a wash-
ing programme'.
• To set the water softener. Refer to the
chapter 'Setting the water softener'.
• To deactivate/activate the audible sig-
nals. Refer to the section 'Audible sig-
nals'.
• To cancel a washing programme in pro-
gress. Refer to the chapter 'Setting and
starting a washing programme'.
5