User manual

– The end-of-programme indicator light
starts to flash.
2. Release the programme selection/cancel
button to cancel the washing pro-
gramme.
At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme.
Fill the detergent dispenser with detergent
before you set a new washing programme.
Interrupting a washing programme
Open the door.
• The programme stops.
Close the door.
• The programme continues from the point
of interruption.
End of the washing programme
Switch off the appliance in these conditions:
• The appliance stops automatically.
• The audible signal for the end of the pro-
gramme operates.
1. Open the door.
– The end-of-programme indicator light
comes on.
– The programme indicator light stays
on.
2. Press the on/off button.
3. For better drying results, keep the door
ajar for some minutes before you remove
the dishes.
Let the dishes cool down before you remove
them from the appliance. Hot dishes are
easily damaged.
Removing the load
• First remove items from the lower basket,
then from the upper basket.
• There can be water on the sides and door
of the appliance. Stainless steel becomes
cool more quickly than the dishes.
Washing programmes
Programme Degree of soil Type of load Programme description Half-load op-
tion
Intensive
70°
Heavy soil Crockery, cut-
lery, pots and
pans
Prewash
Main wash up to 70°C
2 intermediate rinses
Final rinse
Drying
Selectable
1)
Normal
65°
Normal soil Crockery and
cutlery
Prewash
Main wash up to 65°C
2 intermediate rinses
Final rinse
Drying
Selectable
1)
Quick
2)
65°
Normal or light
soil
Crockery and
cutlery
Main wash up to 65°C
Final rinse
Not selectable
50° ECO
3)
Normal soil Crockery and
cutlery
Prewash
Main wash up to 50°C
1 intermediate rinse
Final rinse
Drying
Selectable
4)
12