User manual

2. Carefully lift the two sides until the mech-
anism is engaged and the basket is sta-
ble.
Do these steps to move the upper basket to
the lower position:
1. Pull the basket out until it stops.
2. Carefully lift up the two sides.
3. Hold the mechanism and let it fall back
down slowly.
Caution!
Do not lift or lower the basket on one
side only.
If the basket is in the upper position,
do not put cups on the cup racks.
Select and start a washing programme
Select and start a washing programme
1. Switch on the appliance.
2. Make sure that the appliance is in setting
mode.
3. Select a washing programme. Refer to
'Washing programmes'.
The related programme indicator light
comes on.
4. Close the appliance door. The washing
programme starts automatically.
Interruption of a washing programme
Open the appliance door.
The washing programme stops.
Close the appliance door.
The washing programme continues
from the point of interruption.
How to cancel a washing programme
If a washing programme has not started,
you can change the selection.
When a washing programme is in pro-
gress, it is not possible to change the
selection. It is necessary to cancel the
washing programme to make a new se-
lection.
1. Press and hold the function buttons B
and C until all the programme lights come
on.
2. Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
At the end of the washing programme
The appliance stops automatically.
The audible signals operate.
1. Open the appliance door.
The end-of-programme indicator light
is on.
2. Switch off the appliance.
3. For better drying results, keep the door
ajar for some minutes.
Remove the load
Let the dishes become cold before you re-
move them from the appliance. Hot dishes
are easily damaged.
First remove the items from the lower bas-
ket, then from the upper basket.
There can be water on the sides and door
of the appliance. Stainless steel becomes
cool more quickly than the dishes.
27