LIBRETTO ISTRUZIONI E GB Manual de instrucciones Instruction book IG 656.
Contents Safety instructions 39 Disposal 39 Economical and ecological dishwashing 39 Description of the appliance 40 The control panel 40 Prior to using for the first time Setting the water softener Filling with salt Rinse aid 41 41 42 43 In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent 45 45 45 45 46 46 47 Washing programmes 48 Starting a washing programme 49 Maintenance and cleaning Clea
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. ● This information has been provided in the interest of your safety.
Description of the appliance 1. Upper basket stop 2. Water hardness switch 3. Salt container 4. Detergent dispenser (type A / type B) 5. Control panel 6. Rating plate 7. Rinse aid dispenser (type A / type B) 8. Filters 9. Lower spray arm 10. Upper spray arm 11.
Indicator lights: have the following meanings: Phase indicator lights: have the following meanings: salt refilling indicator light, illuminates when the salt has run out washing: illuminates when the washing phase is running rinse aid refilling indicator light, illuminates when the rinse aid has run out drying: illuminates when the drying phase is running The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and rinse aid is necess
Setting electronically Filling with salt (The dishwasher must be switched off) Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the washing programmes (not the Rinse and Hold programme).
Rinse aid Filling with rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. (Rinse aid dispenser type B) ● 1. Open the container by turning the lid (A) anticlockwise. 2. Add the rinse aid until the container is completely full.
Deactivation/activation of the inflow of rinse aid (The dishwasher must be switched off) When the inflow of rinse aid has been deactivated, also the rinse aid indicator light on the control panel is automatically deactivated. 1. Press the On/Off push button. 2. Press simultaneously function push buttons 2 and 3, until the indicator lights of the function push buttons 1, 2 and 3 start flashing. 3.
In daily use ● Check if it’s necessary to refill with special salt or rinse aid ● Load cutlery and dishes into the dishwasher. ● Fill with dishwasher detergent . ● Select a wash programme suitable for the cutlery and dishes. ● Start the wash programme. Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. ● Before loading the dishes, you should: - Remove large left-overs.
Cutlery should be placed in the removable cutlery basket with the handles facing downwards. If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards. Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position. Mix spoons with other cutlery to prevent them from sticking together.
Use of detergent Detergent tablets Only use detergents specifically designed for use in dishwashers. Detergent tablets of different brands dissolve at different speeds. For this reason some detergent tablets cannot develop their full cleaning power during short programmes. Therefore please use normal programmes with prewash when using detergent tablets. Using no more then the correct amount of detergent contributes to reducing pollution.
Washing programmes Programme Intensive 70° Auto 65° (1) Quick 65° (2) Eco 50° Rinse and Hold Degree of soil and type of load Programme push button Heavy soil. Crockery, cutlery, pots and pans Normal soil. Crockery and cutlery Fresh soil. Crockery and cutlery Normal soil. Crockery and cutlery Any. Partial load (to avoid food scraps from sticking together).
Starting a washing programme To cancel a washing programme in progress 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely ● 2. Turn on the water tap Press simultaneously the function push buttons 2 and 3 for about 2 seconds, the indicator light of the running programme will flash for about 2 seconds. After about 2 seconds all the indicator lights will turn off (except for the On/Off indicator light). At this point the washing programme has been cancelled. 7.
Maintenance and cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). To ensure a correct working of the dishwasher, NEVER try to remove the upper spray arm. Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. ...a flashing fault code appears The dishwasher does not start or stops during operation. All push buttons are inoperative except for the On/Off push button. The indicator light of the programme in progress is flashing and a fault code visible in the digital display (see following chart).
...the wash results are not satisfactory The dishes are not clean ● ● ● ● ● ● ● ● The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. The filters in the base of the washing compartment are dirty or incorrectly positioned. Too little or no detergent has been used.
Installation instructions Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Do not use, for connection, old hoses which have been used in another appliance. If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. Remove all packaging before positioning the machine.
Water outlet hose connection Electrical connection The end of the drain hose can be connected in the following ways: Information concerning the electrical connection is given on the rating plate on the edge of the dishwasher’s door on the right. 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. Before plugging the appliance into the wall socket, make sure that: 1.
Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes" chart).
Küppersbusch Vertriebsgesellschaft mbH Postfach 10 01 32, D-45801 Gelsenkirche, Küppersbuschstraße 16, D-45883 Gelsenkirchen Telefon (02 09) 4 01-0, Telefax (02 09) 4 01-3 03 152969 24/0 Con riserva di modifiche - Salvo modificaciones Subject to change without notice 0 02/03