User manual

Table Of Contents
Problem Possible cause Remedy
The display shows an error
code that is not in this table.
There is an electrical fault. Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
If the display shows the
error code again, contact
the Customer Care De-
partment.
Steam and condensation set-
tle on the food and in the
cavity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
TECHNICAL DATA
Technical data
Voltage 220 - 240 V
Frequency 50 Hz
ENERGY EFFICIENCY
Product Fiche and information according to EU 65-66/2014
Supplier's name Küppersbusch
Model identification EEBD6750.0J
Energy Efficiency Index 98.8
Energy efficiency class A
45