User manual
Table Of Contents
- CONTENTS
- SAFETY INFORMATION
- SAFETY INSTRUCTIONS
- PRODUCT DESCRIPTION
- CONTROL PANEL
- BEFORE FIRST USE
- DAILY USE
- CLOCK FUNCTIONS
- AUTOMATIC PROGRAMMES
- USING THE ACCESSORIES
- ADDITIONAL FUNCTIONS
- HINTS AND TIPS
- Advice for special heating functions of the oven
- Cooking with steam
- Steam water table
- Full Steam / ECO Steam
- Turbo Grilling and Full Steam in succession
- Half Steam + Heat
- Quarter Steam + Heat
- Baking
- Tips on baking
- Baking on one level:
- Bakes and gratins
- Moist Fan Baking
- Multilevel Baking
- Pizza Setting
- Roasting
- Roasting tables
- Grilling
- Frozen Foods
- Slow Cooking
- Defrost
- Preserving
- Drying
- Bread Baking
- Core temperature sensor table
- CARE AND CLEANING
- TROUBLESHOOTING
- TECHNICAL DATA
- ENERGY EFFICIENCY

Set + Go
The function lets you set a heating function
(or a programme) and use it later with one
press of any symbol.
1. Activate the appliance.
2. Set a heating function.
3. Press again and again until the
display shows: Duration.
4. Set the time.
5. Press
again and again until the
display shows: Set + Go.
6.
Press to confirm.
Press any symbol (except for ) to start
the function: Set + Go. The set heating
function starts.
When the heating function ends, an
acoustic signal sounds.
• Function Lock is on when the
heating function operates.
• The menu: Basic Settings
lets you activate and
deactivate the function: Set +
Go.
Automatic Switch-off
For safety reasons the appliance turns off
automatically after some time if a heating
function operates and you do not change
any settings.
Temperature (°C)
Switch-off time
(h)
30 - 115 12.5
Temperature (°C) Switch-off time
(h)
120 - 195 8.5
200 - 230 5.5
The Automatic switch-off does
not work with the functions:
Light, Food Sensor, Duration,
End Time.
Brightness of the display
There are two modes of display brightness:
• Night brightness - when the appliance is
deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a symbol during the
night brightness (apart from ON /
OFF), the display goes back to the
day brightness mode for the next 10
seconds.
– if the appliance is deactivated and
you set the function: Minute Minder.
When the function ends, the display
goes back to the night brightness.
Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you
deactivate the appliance, the cooling fan
can continue to operate until the appliance
cools down.
HINTS AND TIPS
WARNING! Refer to Safety
chapters.
The temperature and baking
times in the tables are guidelines
only. They depend on the
recipes and the quality and
quantity of the ingredients used.
Advice for special heating
functions of the oven
Keep Warm
Use this function if you want to keep food
warm.
The temperature regulates itself
automatically to 80 °C.
19