User manual
Table Of Contents
- CONTENTS
- SAFETY INFORMATION
- SAFETY INSTRUCTIONS
- PRODUCT DESCRIPTION
- CONTROL PANEL
- BEFORE FIRST USE
- DAILY USE
- CLOCK FUNCTIONS
- AUTOMATIC PROGRAMMES
- USING THE ACCESSORIES
- ADDITIONAL FUNCTIONS
- HINTS AND TIPS
- Advice for special heating functions of the oven
- Cooking with steam
- Steam water table
- Full Steam / ECO Steam
- Turbo Grilling and Full Steam in succession
- Half Steam + Heat
- Quarter Steam + Heat
- Baking
- Tips on baking
- Baking on one level:
- Bakes and gratins
- Moist Fan Baking
- Multilevel Baking
- Pizza Setting
- Roasting
- Roasting tables
- Grilling
- Frozen Foods
- Slow Cooking
- Defrost
- Preserving
- Drying
- Bread Baking
- Core temperature sensor table
- CARE AND CLEANING
- TROUBLESHOOTING
- TECHNICAL DATA
- ENERGY EFFICIENCY

2. Press again and again until the
display shows the necessary clock
function and the related symbol.
3. Press or to set the necessary
time.
4. Press
to confirm.
When the time ends, an acoustic signal
sounds. The appliance deactivates. The
display shows a message.
5. Press any symbol to stop the signal.
Heat + Hold
Conditions for the function:
• The set temperature is more than 80 °C.
• The function: Duration is set.
The function: Heat + Hold keeps prepared
food warm at 80 °C for 30 minutes. It
activates after the baking or roasting
procedure ends.
You can activate or deactivate the function
in the menu: Basic Settings.
1.
Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press
again and again until the
display shows: Heat + Hold.
5. Press to confirm.
When the function ends, an acoustic signal
sounds.
The function stays on if you change the
heating functions.
Time Extension
The function: Time Extension makes the
heating function continue after the end of
Duration.
Applicable to all heating
functions with Duration or
Weight Automatic.
Not applicable to heating
functions with the core
temperature sensor.
1.
When the cooking time ends, an
acoustic signal sounds. Press any
symbol.
The display shows the message.
2. Press to activate or to cancel.
3.
Set the length of the function.
4. Press
.
AUTOMATIC PROGRAMMES
WARNING! Refer to Safety
chapters.
Recipes with Recipe Automatic
This appliance has a set of recipes you can
use. The recipes are fixed and you cannot
change them.
1. Activate the appliance.
2. Select the menu: Recipes. Press
to
confirm.
3. Select the category and dish. Press
to confirm.
4. Select a recipe. Press
to confirm.
When you use the function:
Manual, the appliance uses the
automatic settings. You can
change them as with other
functions.
Recipes with Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
1. Activate the appliance.
2.
Select the menu: Recipes. Press
to
confirm.
3. Select the category and dish. Press
to confirm.
15