User manual
Table Of Contents
- CONTENTS
- SAFETY INFORMATION
- SAFETY INSTRUCTIONS
- PRODUCT DESCRIPTION
- CONTROL PANEL
- BEFORE FIRST USE
- DAILY USE
- CLOCK FUNCTIONS
- AUTOMATIC PROGRAMMES
- USING THE ACCESSORIES
- ADDITIONAL FUNCTIONS
- HINTS AND TIPS
- Advice for special heating functions of the oven
- Cooking with steam
- Steam water table
- Full Steam / ECO Steam
- Turbo Grilling and Full Steam in succession
- Half Steam + Heat
- Quarter Steam + Heat
- Baking
- Tips on baking
- Baking on one level:
- Bakes and gratins
- Moist Fan Baking
- Multilevel Baking
- Pizza Setting
- Roasting
- Roasting tables
- Grilling
- Frozen Foods
- Slow Cooking
- Defrost
- Preserving
- Drying
- Bread Baking
- Core temperature sensor table
- CARE AND CLEANING
- TROUBLESHOOTING
- TECHNICAL DATA
- ENERGY EFFICIENCY

Heating function Application
Steam Regenerating Food reheating with steam prevents surface drying.
Heat is distributed in a gentle and even way, which
allows to recover taste and aroma of food as just
prepared. This function can be used to reheat food
directly on a plate. You can reheat more than one
plate at the same time, using different shelf positions.
ECO Roasting When you use this function during cooking, it allows
you to optimize the energy consumption. To get
more information about the recommended settings,
refer to the cooking tables with the equivalent func-
tion.
The lamp may automatically
deactivate at a temperature
below 60 °C during some oven
functions.
Activating a heating function
1. Activate the appliance.
2. Select the menu: Heating Functions.
3. Press
to confirm.
4. Select a heating function.
5. Press to confirm.
6. Set the temperature.
7. Press
to confirm.
Steam cooking
The water drawer cover is in the control
panel.
WARNING! Do not put water
directly into the steam
generator.
Use only water. Do not use
filtered (demineralised) or
distilled water. Do not use other
liquids. Do not put flammable or
alcoholic liquids into the water
drawer.
1. Prepare the food in the correct
cookware.
2. Press the cover of the water drawer to
open it.
3. Fill the water drawer with 800 ml of
water.
The water supply is sufficient for
approximately 50 minutes.
4. Push the water drawer to its initial
position.
5. Activate the appliance.
6. Select a steam heating function and the
temperature.
7. If necessary, set the function Duration
or End Time .
The first steam shows after
approximately 2 minutes. An acoustic
signal sounds when the appliance is at
approximately the set temperature.
When the steam generator is
empty, an acoustic signal
sounds.
The signal sounds at the end of the cooking
time.
8.
Deactivate the appliance.
CAUTION! The appliance is
hot. There is a risk of burns.
Be careful when you empty
the water tank.
When the appliance cools down, soak up
all remaining water from the steam
generator with the sponge. If necessary,
clean the steam generator with some
vinegar. Let the appliance dry fully with the
door open.
Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar
13