User manual

Problem Possible cause Solution
Audible or visual alarm is on. The cabinet has been re-
cently switched on or the
temperature is still too high.
Refer to "Door Open Alarm"or
"High Temperature Alarm".
The temperature in the ap-
pliance is too high.
Refer to "Door Open Alarm"or
"High Temperature Alarm".
The door is left open. Close the door.
The temperature in the ap-
pliance is too high.
Contact a qualified electrician
or contact the nearest Author-
ized Service Centre.
The lamp does not work. The lamp is in stand-by. Close and open the door.
The lamp is defective. Refer to "Replacing the lamp".
The compressor operates
continually.
Temperature is set incor-
rectly.
Refer to "Operation" chapter.
Many food products were
put in at the same time.
Wait some hours and then
check the temperature again.
The room temperature is
too high.
Refer to climate class chart on
the rating plate.
Food products placed in
the appliance were too
warm.
Allow food products to cool to
room temperature before stor-
ing.
The door is not closed cor-
rectly.
Refer to "Closing the door".
DEMO appears on the dis-
play.
The appliance is in demon-
stration mode.
Keep the Mode pressed for ap-
proximately 10 seconds until a
long sound is heard and display
shuts off for a short time.
The temperature in the wine
cellar is too high.
There is no cold air circula-
tion in the appliance.
Make sure that there is cold air
circulation in the appliance.
The temperature regulator
is not set correctly.
Set a lower temperature.
The door is not closed cor-
rectly.
Refer to "Closing the door".
Many bottles are stored at
the same time.
Store less bottles at the same
time.
There is no cold air circula-
tion in the appliance.
"Make sure that there is cold air
circulation in the appliance.
21