manual

3
Set Alarm Up C/F
Down
SNOOZE CH Alert Max/Min
standard
Click ----- Alarm on/off 12hr/24hr
switch able
°C/°F switch
able
Back Light/
enter
Snooze
Switch to
CH1, CH2,
CH3
On/Off
temperature
Alarm
Display
max/min
Hold enter into
clock setting
enter into
alarm
setting
----- Enter
into RCC
directly
----- Clear
current
registered
Into
temperature
alarm setup
clear max/
min
Times
Click Confi rm
the setting
item
----- one step
forward
one step
backward
Back light ----- ----- -----
Hold ----- ----- 8steps/
second
forward
8steps/
second
backward
----- ----- ----- -----
Alarm set
Click ----- confi rm the
setting item
one step
forward
One step
backward
Back light ----- ----- -----
Hold ----- ----- 8steps/
second
forward
8steps/
second
backward
----- ----- ----- -----
Temp aler t set
Click ----- ----- one step
forward
one step
backward
Back light Choose
needed
channel
Confi rm
the Setting
item
-----
Hold ----- ----- 8steps/
second
forward
8steps/
second
backward
----- ----- ----- -----
3.2 Normal states
1. Hold “SET” to enter into time setting.
2. Click “Alarm” to switch the alarm on/off.
3. Hold “Alarm ” for more than 2 seconds to enter into Alarm setting.
4. Click “Up” to switch between 12hr/24hr.
5. Press “C/F Down” to switch between °C/°F.
6. Press “Channel” to switch RF channel, CH1 → CH2 → CH3.
7. Press ”ALERT” key to switch temperature alarm on/off.
8. Hold ”ALERT” key 2 seconds to enter temperature alarm setting.
9. Press ”MAX/MIN” key to check maximal and minimum of temperature and humidity.
10. Hold ”MAX/MIN” key 2 seconds to clear all record of temperature and humidity.
11. The backlight will be turn on when sound controlled switch able will be put “on”.
12. The backlight will be turn off when sound controlled switch able will be put “off ”.
13. Hold “CH” key for 2 seconds to clear out all data of current “Channel”.
14. When it is receiving signals, press “Down” key more than 2s will exit RCC receiving status.
15. When ALARM rings, click “SNOOZE” to enter into the snooze state every 5 minutes.
3.3 Time set
1. Hold “SET” key for 2 seconds to enter into time setting.
2. The sequence of time setting: OFFSET → Hour → minute → Year(2000-2099) → Month →
Date → Language → Exit.
3. There will have 1Hz fl ashing during setting.
4. Press “SET” to confi rm the setting, and enter the next setting state.
5. Press “Up” one time, the setting will go ahead for one step; hold the key for 2 seconds, it will
run forward by 8 steps/second.
6. Press “Down” one time, the setting will backward for one step; hold for 2 seconds, it will run
back by 8 steps/second.
7. Moon phase is changed according to year, month, date.
8. The system will exit automatically if no key is operated in 8 seconds.