User manual

8
Information Menu
-Whenyouenterthe“Information”menuyouwillseeascreenlikeabove.
The screen displays some parameters of information of current channel
-Press[Exit].
Load Factory Default
- Press [OK] key to enter the selected item.
-Conrmyesornotoloadfactorydefault.
TECHNICAL SPECIFICATIONS
Tuner and Channel
• FrequencyRange:51MHzto860MHz
• Channelbandwidth:6/7/8MHz
• Demodulation:COFDM2K,8K
• Mapping:QPSK,16-QAM,64-QAM
• Guard-Interval:1/2,2/3,3/4,5/6,7/8
• Demodulation:COFDM
MPEG Transport Stream & A/V Decoding
• TransportScream:MPEG-2ISO/IEC13818TransportStream
Specification
• ProfileLevel:MPEG-2MP@ML
• FrameRate:25HzforPAL,30HzforNTSC
OSD Setting
- Press [Left/Right] key to select subtitle on/off.
- Press [Left/Right] key to set OSD transparency.
- Press [Left/Right] key to set OSD pallete.
-Press[Exit].
Parental Lock
Youcansetapasswordforanyonewhowishestooperateinthe“Installation”
menu.
You can also set a password for the locked channels. Refer to chapter about
how to set a locked channel.
Press [OK] key. A dialogue will prompt to input the password. The default
password is “3330”. When you input the correct password a screen like
below will appear:
- Press [Left/Right] key to select menu lock on/off.
- Press [Left/Right] key to select channel lock on/off.
-Press[Exit].
Tuner Setting
- Press [Left/Right] key to select tuner power on/off.
-Press[Exit].
Tools
- Press [Up/Down] key to select submenu.
- Press [OK] key to enter the selected item.