Getting Started Guide

8
 Charging with travel charger
 Insert the small end plug of the travel charger into the multifunction jack. Improper
connection of the travel charger may result in serious damage to the phone and will void
the warranty for any damage caused by incorrect operation.
1. Plug the large end plug of the travel charger into an electrical outlet.
 You can use the phone during charging, but this will extend the time for the battery to fully
charge;
 The phone becomes hot when charging. The phenomenon is normal, and does not affect
the phone’s life or performance;
2. When the battery is fully charged (the battery icon is no longer moving), disconnect the
travel charger from the phone, and then unplug it from the power outlet.
 Use computer data cable to charge
Make sure your computer is turned on before charging.
1. Plug one end of the computer’s data cable (mini-USB) into the multifunction jack.
2. Connect the other end of the data cable to the computer’s USB port; it may take a moment
to start charging.
3. When the battery is fully charged (the battery icon is no longer moving), disconnect the
computer data cable from the phone, and then unplug it from the computer.
Getting Started
Power on and off
Turn on the Power and press Power
Turn off the Power, press the Power button, and then select close.
In areas where wireless devices are prohibited, such as airplanes and hospitals, observe
all posted warnings and instructions from officials.
To use only non-network services on your phone, switch to Airplane mode.