Product Manual

NOTE: Mirror can be used on either the right or left side.
1. Use the mounting
bracket as a
template and drill
two 17/64” holes in
the cab frame above
the handrail.
2. Fasten the
mounting bracket
using two 5/16” x
3/4” self-threading
screws.
3. Fasten the mirror
arm assembly to
the mounting
bracket with two
5/16” x 1” full thread
bolts, flat washers,
lock washers and
nuts.
4. Insert the small
tube into the mirror
arm assembly and
secure with the
plastic mirror
knob.
5. Fasten the mirror
head to the small pipe with the 2” clamp and included hardware.
Small Tube
PN: 10622
2” Clamp
PN: 10613
Mirror Head
PN: 3110
Plastic
Mirror Knob
PN: 85108
Mounting
Bracket
PN: 10627
Installation Guide
Mirror Arm
Assembly
PN: 12171
John Deere 8000 Series Mirror (PN: 3139)
Note!
Do not overtighten the plastic
mirror knob in step 4.
Fits:
JD 8000 & 8010 Series
004-JD-3139-001
1.800.328.1752 / www.tractorseats.comCustomer Support