Setup instructions

Illustration A1
1
2
3
4
5
14315 Soprano Saxophone Stand
-for curved Soprano Sax
-foldable
-flexible upper support arm
-extendable
Instructions for Set-Up
Illustration A
-Unfold legs from base tripod mechanism.
-Fit the tube 2 directly into the base tripod mechanism 1, making sure to position the small molded tab into
-the base opening (Illustration A1).
-Use screw knob 5 to tighten and secure the tube to the base tripod mechanism.
-Adjust T-shaped lower support arm bracket 3 to the top slot of the tube 2.
Illustration B
-The upper support arm 4 can also be shaped by bending carefully to accommodate different size bells.
Illustration C
-The upper support arm 4 is designed to hold the instrument at a particularly slanted angle. This ensures
-that the instrument is kept securely in place.
Available accessories
:
-Saxophone Stand can be used with peg holder and clarinet peg or with peg holder, adapter and pegs for
-trumpet, soprano sax or flugel horn.
Made in Germany
Illustration A Illustration B
Illustration C
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
14315-000-55 Rev.07 03-80-298-00 9/19