User manual

92798 Cape Arago Hwy, Coos Bay, OR 97420 | 541-888-3517 | Toll Free 800-867-6863 | kksound.com

3. Apply double stick tape to the golden side of the transducers, it is a very thin film:

We recommend applying two layers of the double stick tape. After the first layer is applied as shown, peel

off the brown protective tape. Repeat the procedure. This helps to reduce the sensitivity towards unwanted

mechanical transmissions and guarantees the most secure adhesion.

4. Put the transducers into the treble side F-hole. If you have a pick-guard, remove it temporarily.

Maneuver the bass side pickup over to the bass side F-hole, and fish it out with tweezers or needle-nose

pliers.

5. Locate the putty piece and form a round ball from it.