Installation Instructions

K&H Manufacturing, Inc.
Pet bed Warmer
Thank you for purchasing K&H Manufacturing’s PET BED WARMER. When used correctly, your PET BED
WARMER should provide years of hassle free warmth for your pet. Your PET BED WARMER is intended for indoor
use.
Its unique heating system is designed to become warm, not hot.
WARNING: This is an electrical product. Read all directions and precautions carefully before
operating. Failure to properly follow all directions and instructions may lead to electric shock or fire,
which could cause serious bodily injury.
For household us Only
Important safeguards
When using electrical appliances, basic safety precautions should always be followed including the following:
1. Read all instructions.
2. To protect against electrical hazards, DO NOT immerse cord, plug or appliance in water or other liquid.
3. Close supervision is necessary when used by or near children.
4. ALWAYS unplug from outlet when not in use.
5. DO NOT operate any electrical appliance with a damaged cord or plug, or if the appliance malfunctions or has
been damaged in any manner. RETURN all malfunctioning appliances to the factory for examination.
6. DO NOT use appliance for other than its intended use.
7. DO NOT PUNCTURE HEATER FOR ANY REASON.
8. For use with 110-120 volt AC ONLY.
9. CORD MUST EXIT towards the back of bed, away from normal travel of pet.
10. A liner must separate the pet bed warmer from the stuffing material.
11. When using this product, make sure your pet has the option of sleeping on or OFF the bed.
12. SAVE THESE INSTRUCTIONS FOR YOUR USE.
Instructions
1. Make sure your pets bed has a removable outer lining with a zipper or other means of closing and
opening.
1. Carefully position your PET BED WARMER between outer and inner lining and close the opening so your pet
cannot remove the heating pad. When in use, check the pad to ensure proper positioning.
2. Turn the bed so the cord is exiting the back of the bed, away from the normal path traveled by your pet.
3. When cleaning the bedding, unplug and remove the PET BED WARMER so you do not subject it to being
immersed in liquids or cleaners.
4. Follow the above instructions when reassembling you THERMO-BED.
Testing your new PET BED WARMER
After operating 1-2 hours, place your hands on your pet’s bed for 20-30 seconds, applying. You will feel the radiant
warmth your pet will enjoy.