Installation Instructions

How to install your new Kitty Sill
Your new Kitty Sill can be attached to virtually any windowsill using one of two provided
attachment methods.
Velcro® attachment: (For any windowsill.) Upon removing the Kitty Sill from box, note the
forward edge of the tray portion. The screw holes in the tray are to be nearest the window. Hold
the tray onto desired mounting position on the windowsill and determine positioning of legs.
Snap legs into position and hold up to windowsill again. Be sure the Kitty Sill is level. If the
Kitty Sill is not level, snap legs into another position. Once desired adjustments are made,
remove tray and attach Velcro® to the raised portion on the bottom of the Kitty Sill tray directly
under the two outside screw holes. Gently set the tray down onto windowsill in the desired
position. Press down firmly above the Velcro® strips to ensure proper adhesion to windowsill.
For best results, wait 24 hours before using. (This gives the Velcro® adhesive optimal time for
proper adhesion.)
Screw attachment: (For wood windowsills.) Remove cloth cover, foam and heating unit. (If
unit is a heated Kitty Sill.) Use same positioning techniques as above. Once desired position is
achieved, mark windowsill through the screw holes in tray using a pencil. Using a 1/16” drill bit,
drill 1” down into windowsill. Use a phillips head screwdriver to attach Kitty Sill with the 3
provided screws. Replace heating unit, (if unit is a heated Kitty Sill) foam, and cloth cover and
your Kitty Sill is ready for use. Rubber bumpers may be attached to the legs where they meet the
wall if more stability is needed.
Limited 1 year Warranty
K & H manufacturing warrants to the original consumer, that this product will be free of defects and workmanship for a period of
one year from the date of purchase. The manufacturer’s liability hereunder is limited to replacement of the product This warranty
is void if the product has been damaged by accident, unreasonable use, neglect, tampering, or other causes not arising from
defects in material or workmanship.
To exercise your warranty: If during the warranty period, your product malfunctions return it to the place of purchase with your
original purchase receipt. If this cannot he done, return the product, postage prepaid, to
K & H Manufacturing, with dated proof of purchase or original dated receipt. A return authorization number, obtained by
calling [phone] must accompany all returns to manufacturer. Please include a note explaining the problem when
returning the product.